Быстрый просмотр
Wet grinding of agglomerates after mixing or sizing of dry granules after fluid bed drying can be performed using the same mill. Screens are available in various sizes and geometries. The cone mill is available as an integrated system or a stand-alone type.
Быстрый просмотр
The Rotocrusher is a clod crusher (rotary crushing valve) with a minimum throughput of 750 kg/h and a maximum of 3000 kg/h.
| Размеры | DN100, DN150, DN200, DN250 |
| Материалы | нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
Provides safe handling and easy transport of detachable turrets for installation, removal or maintenance.
Быстрый просмотр
POM body, for low to medium viscosity materials
| Длина | 80 мм |
| Работа | пневматическая (давление и время) |
| Привод | 90 г |
| Технические подробности | 27 мм |
| Вход материала | 1/8 дюйма |
| Материал смачиваемых частей | ПОМ, ПЭ-СВМП, Ацеталь |
| Диапазон вязкости жидкости (макс.) | 50,000 мПа · с. |
| Объем дозирования (мин.) | 0,001 мл |
| Скорость потока | 300 мл / мин (H2O, 2 бара) |
| Давление жидкости (макс.) | 5 бар |
| Вес в упаковке | 0,33 кг |
| Рабочее давление (мин.) | 4 бар |
| Рабочая частота | 500 циклов / мин. |
| Выход материала | Люэр-Лок (игольчатое соединение) |
| Материал | HDPE |
Characteristics
Быстрый просмотр
The rotary actuator, controlled by compressed air, precisely regulates the air flow to the coater by changing the position of the damper.
Быстрый просмотр
Big Bag, Drum and Carton Filling If you are handling multiple packages, Dec can help provide one single multi-pack filling station that handles FIBCs, drums, cartons, etc.). This system can be equipped with various docking systems depending on the required level of tightness. It can also be equipped with both an interchangeable platform and a support frame adapted to the type of packaging, as well as a multi-scale system adapted to the filling weight.
Быстрый просмотр
The device generates heated air to feed the fluidized bed dryer. This air handling unit contains a coil steam heating system, the machine will control the air temperature and adjust the steam to maintain the desired temperature. Contains pre-filter, middle filter and HEPA filter.
Быстрый просмотр
When you need to provide a clean, isolated environment for the safe handling of powders for dosing, weighing, sampling or parting, our PharmAir booths are a very efficient option. We offer complete containment solutions based on an innovative range of downflow containment chambers that can bring different features and benefits to your application. But they all have one thing in common: They provide a guaranteed working environment. Offers include installation, commissioning, IQ/OQ inspection, containment testing and after sales service by our fully trained engineers.
Быстрый просмотр
The device for rejecting incorrectly installed capsules is located behind the feeder. If split or damaged capsules are blocking the channel, the device will purge air to remove the bad capsules from the supply port.
Быстрый просмотр
The LOS-150 machine is designed for applying self-adhesive labels on cylindrical and rectangular cans, as well as gluing instructions to the lids.
High-precision label positioning thanks to servo drives and high performance in small dimensions are the key advantages of this model.| Другие настройки | 2 |
| Размеры | 3500 (Д) x 2200 (Ш) x 2100 (В) |
| - Производительность | Макс. 200 банок в минуту (зависит от размера контейнера и этикетки) |
| Размеры этикетки | (ширина) 20-130 мм, (длина) 30-200 мм |
| Размеры контейнера | (круглый) 30-100 мм, высота 60-150 мм, (квадратный) 40-80 мм, высота 60-150 мм |
Characteristics
Быстрый просмотр
The PTK torque motor replaces the traditional belt driven motor and gearbox. This reduces heat generation and noise. Additional heat reduction is possible by selecting a water-cooled motor with intermittent water supply. The volume of water supply must be prepared at the customer's site.
Быстрый просмотр
Machine models RWM180-400 are an advanced technological solution for the internal washing of ampoules and vials. The servo-driven system allows you to simultaneously increase the cleaning efficiency and reduce the time for changing format parts. An extensive list of accessories provides the possibility of flexible customization to individual requirements.
| Производительность | 18000 |
| Размеры (ШxВxГ) | 1670 х 1480 х 1330 мм |
| Станция 2 | мытье внутри водой (или оборотной водой в случае рециркуляции WFI) |
| Станция 4 | продувка стерильным воздухом внутри |
| Станция 6 | внутренняя мойка WFI |
| - Производительность | до 18000 / час при обработке объектов согласно нормам DIN / ISO |
| станция 8 | продувка стерильным воздухом внутри |
| между станцией 1 и станцией 2станция 3 | продувка стерильным воздухом внутри |
| продувка стерильным воздухом снаружи между станцией 3 и станцией 4станция 5 | внутренняя мойка WFI |
| мытье снаружи с WFI между станцией 5 и станцией 6станция 7 | продувка стерильным воздухом внутри |
Characteristics
Быстрый просмотр
The capsule loader is an option for the PTK capsule filling machine. Designed to lift the capsules to prevent them from separating and crushing during loading. Automatic operation is controlled by a sensor.
Быстрый просмотр
The tablet feeder uses innovative orientation and separation technology to accurately dispense tablets into hard gelatin capsules. Encapsulation of single or multiple tablets as well as tablet/powder/granule combinations is made possible by the addition of this precise device.
Быстрый просмотр
The metal detector is an option for the PTK tablet press. Most pharmaceutical tablets and capsules can be tested in the MET 30+ with an aperture size of 95mm W x 38mm H, providing calibrated sensitivity of 0.3mm Fe, 0.35mm Nfe and 0.5mm SST. 316 steel. For smaller products (typically no larger than 8 mm diameter), the MET 30+ can also be used with dimensions of 95 mm W x 22 mm H, providing an efficiency of 0.25 mm Fe, 0.3 mm Nfe and 0.39 mm StSt 316
Быстрый просмотр
HCP312 high efficiency automatic corrugated box packer. The modular design of the machine allows it to be adapted to specific customer requirements.
Boxes are closed with adhesive tape or with hot glue. The unique design of the machine enables easy integration with the aggregation systems increasingly required by the pharmaceutical industry.| Производительность | до 12 коробок/мин |
| Другие настройки | 2 |
| Допустимые размеры коробок | C - 100 - 350 мм |
Characteristics
Быстрый просмотр
The PTK tablet press duster option is a highly efficient vibrating spiral that moves the tablets up or down to remove dust by vibration. The machine is also equipped with a vibration control system to change the vibration frequency so that it can be easily optimized. Switching on and off the machine is carried out from the control panel of the PTK press or independently.
Быстрый просмотр
The PM-C series PTK high-speed mixers with a special blade agitator are designed for mixing and granulating powders in the laboratory.
Interchangeable tank design minimizes cleanup time and material wastage for maximum production flexibility.| Производительность | Производительность [кг]: 2.7-4.6; |
| Другие настройки | 2 |
| Объем | Объем емкости [л]: 10.1;Рабочий объем [л]: 3.8-6.6; |
| Параметры источника питания | 220/380/400/415/440/460В перем. тока, 3 фазы, 50/60 Гц |
| Параметры управления | 24 В постоянного тока |
| Приводной двигатель мешалки [кВт] | 0.75 |
| Макс. скорость мешалки [об/мин] | 300 |
| Двигатель привода лопастей [кВт] | 0.75 |
| Макс. скорость лопастей [об/мин] | 3,000 |
| Размеры [мм] | 1,190 x 555 x 1,450 |
| Вес [кг] | 550 |
Characteristics
Быстрый просмотр
Magnesium is supplied from a separate rack. The rack consists of a magnesium hopper and a control cabinet. Rollers are used to facilitate movement. Magnesium is supplied to the spray block, which is installed at the base of the feeder.
Быстрый просмотр
The powder is loaded by a dust collector and discharged by an insulated vacuum conveyor. The finished material is fed through an antistatic hose to a vacuum conveyor (option). The anti-static hose minimizes getting stuck inside the hose, which reduces power transfer time and safely eliminates the risk of static electricity.
