Быстрый просмотр
Pneumatic cylinder opening of the tank lid is an option for the PTK high speed mixer. The container lid is automatically lifted by an air cylinder at the touch of a button.
Быстрый просмотр
Split butterfly valves consist of two parts: an active half and a passive half. Typically, the active half is connected to a receiving vessel or processing machine, while the passive half is usually mounted on a discharge drum or similar device.
| Размеры | DN50, DN100, DN150, DN200, DN250 |
| Материалы | корпус и бабочка – нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
The option for the PTK tablet press, the built-in powder loader, works in the same way as the standard powder loader, however the control systems are built into the PTK machine itself. This gives a more compact system in confined spaces.
Быстрый просмотр
Manual, up to 3.5 bar Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/greases, silicone (RTV)/gels, solder masks/pastes/PVA, thinner
| Вес | 40 г |
| Длина | 104 мм |
| Работа | ручная |
| Привод | ручная |
| Технические подробности | 0,14 кг |
| Вход материала | люэровский наконечник (мама) |
| Материал смачиваемых частей | только штуцер |
| Микродозирование | - |
| Диапазон вязкости жидкости (макс.) | 50,000 мПа · с. |
| Объем дозирования (мин.) | 0,0075 мл |
| Спрей | - |
| Заполненные материалы | + |
| Материал на выходе | люэровский наконечник (папа) |
| Скорость потока | 1680 мл / мин (вода, 3,5 бар) |
| Давление жидкости (макс.) | 3,5 бар |
| Материал | ПЭ |
Characteristics
Быстрый просмотр
Pneumatic, especially suitable for abrasive and two-component media Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/lubricants, silicone (RTV)/gels, solder masks/pastes/PVA , solvent
| Вес | 90 г |
| Длина | 75 мм |
| Расход | 1980 мл / мин (вода, 4 бара) |
| Работа | пневматическая (давление и время) |
| Привод | пневматический |
| Технические подробности | 0,31 кг |
| Вход материала | люэровский наконечник (мама) |
| Диапазон вязкости жидкости (макс.) | 50,000 мПа · с. |
| Объем дозирования (мин.) | 0,0075 мл |
| Заполненные материалы | + |
| Материал на выходе | люэровский наконечник (папа) |
| Давление жидкости (макс.) | 4,0 бар |
| Материал смачиваемой части | ПЭ |
| Материал | ПЭ |
Characteristics
Быстрый просмотр
The powder loader is an option for the PTK capsule filling machine. The vacuum effect automatically feeds the powder into the main hopper. If there is not enough powder in the hopper, a signal activated by the sensor starts the vacuum pump, which starts the powder supply. The control panel and powder loader are combined and consist of a hopper and a suction pipe, as well as an antistatic connecting hose and an air hose.
Быстрый просмотр
The Hanningfield Uni-Dust centrifugal precipitator is specifically designed to recover waste powder from in-house pharmaceutical processes such as compression and encapsulation, typically capturing 90 to 99.9% of waste powder. - Highly efficient design covering 90 - 99.9% - Prevents clogging and replacement of expensive filters in a central vacuum system or vacuum cleaner - Improved lot alignment and product recovery - Virtually zero maintenance costs with no moving parts or filters - Reconstituted powder can be re-introduced - minimizing material wastage and saving money
| Прибл. вес | 40 кг |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр корпуса циклона | 203.2 мм |
| Диаметр впускной/выпускной трубы | 101.6 мм |
| Диаметр выхода продукта | 139.7 мм |
Characteristics
Быстрый просмотр
As an option for the PTK tablet press, the powder feeder automatically feeds the powder into the main powder hopper of the machine using vacuum. If the level of powder in the hopper is low, a signal activated by the sensor starts the vacuum pump, which starts the powder supply.
Быстрый просмотр
The lightweight rotary valve is suitable for the pharmaceutical, chemical and food industries. - Delivers large volumes of powder at a controlled rate. - cGMP design - Easy to install - top and bottom halves connections can be supplied to match customer's existing ones. The valve is powered by a pneumatic actuator requiring a connection to compressed air, which means no wiring and simplifies valve testing in ATEX areas. - All parts are easily disassembled for easy cleaning and replacement of wear parts. - All contact parts are made of 316L steel, and non-metal parts are FDA compliant. Full documentation is provided with each valve. - Can be supplied with a small gap between rotor and gasket to prevent gasket friction with each revolution.
| Размеры | DN80, DN100, DN150, DN200, DN250, DN300, DN350, DN400 |
| Материалы | корпус и ротор нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
The Hanningfield Uni-Dust centrifugal precipitator is specifically designed to recover waste powder from in-house pharmaceutical processes such as compression and encapsulation, typically capturing 90 to 99.9% of waste powder. - Highly efficient design covering 90 - 99.9% - Prevents clogging and replacement of expensive filters in a central vacuum system or vacuum cleaner - Improved lot alignment and product recovery - Virtually zero maintenance costs with no moving parts or filters - Reconstituted powder can be re-introduced - minimizing material wastage and saving money
| Прибл. вес | 2 кг |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр корпуса циклона | 50.8 мм |
| Диаметр впускной/выпускной трубы | 25.4 мм |
| Диаметр выхода продукта | 50.8 мм |
Characteristics
Быстрый просмотр
The Rotovalve Plus is designed to assist in the loading and volumetric dosing of bulk solids. - Delivers large volumes of powder at a controlled rate. - Ideal for applications where a higher degree of accuracy is required (compared to Rotovalve Light). - CIP and SIP cleaning - All parts are easily disassembled for easy cleaning and replacement of wear parts. - All contact parts are made of 316L steel, and non-metal parts are FDA compliant. Full documentation is provided with each valve. - cGMP design - Easy to install - top and bottom halves connections can be supplied to match customer's existing ones.
| Размеры | DN100, DN150, DN200 |
| Материалы | корпус и ротор – нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
Hanningfield Uni-Connect silicone connectors are designed to provide a quick and hygienic connection for dust-tight transfer of powder between joints.
| Диаметр | 2 дюймов |
| Толщина стенки | 1.6 мм |
| Длина | 40 мм |
| Материал | полупрозрачный силикон |
Characteristics
Быстрый просмотр
Advanced benchtop autoclave bioreactor for research and development, process optimization and small scale biomanufacturing for biopharmaceutical, food, agricultural and other biotechnological applications. Standardized and modular benchtop laboratory reactor, combines the highest technological solutions, meets experimental and industrial scale conditions and is well thought out in terms of its expansion and customization. The reactor system is based on: 1) Extensibility and modularity thanks to the Plug & Play concept, allowing for additional functions in the future. 2) Flexibility and versatility as the configuration covers a wide range of vessel volumes, bioreactor types and combinations.
| Объем реактора | 1 л; 2 л; 3 л; 5 л; 8 л; 10 л; |
| Емкость | боросиликатное стекло |
| Другие поверхности, контактирующие с продуктом | aisi 316l и epdm |
| Габариты (Ш x В x Г мм.) | 420x861x642 (Двойной) |
| Тип сосуда | стеклянный |
| Скорость мешалки (об/мин) (зависит от модели) | 0-500 f1 cc |
| Минимальный рабочий объем (л) (зависит от модели) | 3,6 (5 л) f1 cc |
Characteristics
Быстрый просмотр
Dust collector is an option for the PTK capsule filling machine. Dust is sucked out of the machine and dust collector through this device, which helps the machine to be neat and clean.
Быстрый просмотр
The double jacket is an option for the high speed PTK mixer. The container has a double jacket. Water or steam is supplied to the wall cavity to control the temperature of the container.
Быстрый просмотр
The Hanningfield Uni-Dust centrifugal precipitator is specifically designed to recover waste powder from in-house pharmaceutical processes such as compression and encapsulation, typically capturing 90 to 99.9% of waste powder. - Highly efficient design covering 90 - 99.9% - Prevents clogging and replacement of expensive filters in a central vacuum system or vacuum cleaner - Improved lot alignment and product recovery - Virtually zero maintenance costs with no moving parts or filters - Reconstituted powder can be re-introduced - minimizing material wastage and saving money
| Прибл. вес | 68 кг |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр корпуса циклона | 304.8 мм |
| Диаметр впускной/выпускной трубы | 139.7 мм |
| Диаметр выхода продукта | 203.2 мм |
Characteristics
Быстрый просмотр
The C80 vertical corrugator is designed to handle a wide range of products such as bottles, tubes, jars, flow packs, cartons and sachets.
The model is also available in HS (high-speed) modification and can work with both standard boxes and corrugated boxes with a removable lid.| Производительность | До 18 объектов/мин До 36 объектов/мин (модель C80HS) |
| Другие настройки | 2 |
| Размеры | 3988 х 2065 x 2397(В) мм |
| Габариты короба | максимальные - 450 x 310 x 350 |
Characteristics
Быстрый просмотр
Stainless steel body, for low to medium viscosity materials Typical dispense liquids: Adhesives, UV adhesives, alcohols/methanol, oils/greases/lubricants, solvents
Быстрый просмотр
Our self-contained, ready-to-use design provides a functional clean space anywhere, anytime. Whether you want to expand production, R&D or manufacturing capacity at an existing facility, in a remote location or around the world, MCR (mobile clean rooms) can be transported and fully commissioned faster than other clean room options. Our pre-engineered MCRs provide a fast and flexible cleanroom manufacturing space without the significant time and cost associated with more traditional cleanroom options.
Быстрый просмотр
The benchtop semi-automatic machine, using the technology of the DMC series counting and filling machines, is designed to check the filling accuracy in daily operations.
| Другие настройки | 2 |
| Размеры | 600 (Д) x 220 (Ш) x 520 (В) |
| Вес нетто | 55 кг |
| - Производительность | Примерно 10 секунд для подсчета 100 таблеток |
| Размеры банок | диаметр 30-100 мм, высота 40-200 мм |
Characteristics
