The tablet feeder uses innovative orientation and separation technology to accurately dispense tablets into hard gelatin capsules. Encapsulation of single or multiple tablets as well as tablet/powder/granule combinations is made possible by the addition of this precise device.
Dust collector is an option for the PTK capsule filling machine. Dust is sucked out of the machine and dust collector through this device, which helps the machine to be neat and clean.
As an option for the PTK capsule filling machine, the pellet filling machine is designed to fill hard gelatin capsules with pellets. It is designed to minimize weight fluctuation so pellet feed can be easily adjusted to achieve a given weight.
Replacement parts are an option for the PTK capsule filling machine. The machine can be configured for any size capsule with a range of replacement parts available. The capsule filling device is designed to be easily replaced by qualified operators.
The device for rejecting incorrectly installed capsules is located behind the feeder. If split or damaged capsules are blocking the channel, the device will purge air to remove the bad capsules from the supply port.
Removes external dust from finished capsules and transports them upwards for discharge into the product container.
Размеры машины [мм] | 500 x 800 x 2,218 |
Параметры источника питания | 220/380 В перем. тока, 3 фазы, 50/60 Гц |
Вес машины [кг] | 340 |
Мощность привода [кВт] | 0,4 |
Макс. производительность [капсул/час] | 420,000 |
Параметры элементов управления | 24 В постоянного тока |
Characteristics
The capsule loader is an option for the PTK capsule filling machine. Designed to lift the capsules to prevent them from separating and crushing during loading. Automatic operation is controlled by a sensor.
The powder loader is an option for the PTK capsule filling machine. The vacuum effect automatically feeds the powder into the main hopper. If there is not enough powder in the hopper, a signal activated by the sensor starts the vacuum pump, which starts the powder supply. The control panel and powder loader are combined and consist of a hopper and a suction pipe, as well as an antistatic connecting hose and an air hose.
The capsule polisher is an option for the PTK capsule filling machine. Dust on manufactured capsules can be removed with this capsule polishing machine.