Быстрый просмотр
Stainless steel needle valve for accurate dosing of low to medium viscosity liquids Dosing material: Adhesives, UV adhesives, alcohols/methanol, oils/greases/lubricants
Быстрый просмотр
Stainless steel body, for low to medium viscosity materials Typical dispense liquids: Adhesives, UV adhesives, alcohols/methanol, oils/greases/lubricants, solvents
Быстрый просмотр
Pneumatic, especially suitable for abrasive and two-component media Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/lubricants, silicone (RTV)/gels, solder masks/pastes/PVA , solvent
Быстрый просмотр
Manual, up to 3.5 bar Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/greases, silicone (RTV)/gels, solder masks/pastes/PVA, thinner
Быстрый просмотр
Dispensing robot with 4 axes, arm length 750 mm
Быстрый просмотр
Dispensing robot with 3 or 4 axes, working range adjustable
Быстрый просмотр
Dispensing robot with 3 or 4 axes, working range adjustable
Быстрый просмотр
With the help of the RT-F1300N rotary table, round shapes can be dispensed conveniently into hard-to-reach places. Easily adjustable, tiltable Z-axis provides controlled, fixed-angle dosing rotation. For example, the material to be dosed may be applied to a vertical inner or outer wall of a cylindrical component. The turntable is used for dosing adhesives, silicones, greases and lubricants and is fully programmable in terms of speed, wheel diameter, cycle and dosing time. VIEWEG's wide range of accessories allows the installation of cartridges and valves in the Z direction. VIEWEG also offers a range of dispensers, valves and valve controllers. We will be happy to advise you.
Быстрый просмотр
Dispensing robot with 3 or 4 axes, working area 510 X 620 mm
Быстрый просмотр
Dispenser with digital peristaltic pump for low viscosity and aggressive materials, with stainless steel pump head
Быстрый просмотр
The digital dispenser series is available in three models (pressure 2, 4 or 6 bar) with display, vacuum control, incl. Accessories
Быстрый просмотр
The digital dispenser series is available in three models (pressure 2, 4 or 6 bar) with display, I/O port, vacuum control, incl. accessories and a large set of nozzles.
Быстрый просмотр
Dispenser with pressure regulator and manometer
Быстрый просмотр
Analog pipette with vacuum gripper and timer, up to 7 bar, with vacuum back suction, incl. Accessories
Быстрый просмотр
Fully digital dispenser with level indicator at the compressed air outlet, 2 to 6 bar (options), incl. Accessories
Быстрый просмотр
Analog dosing device with timer, 1 to 7 bar (options), with vacuum back suction, incl. Timer
Быстрый просмотр
Analog pipette without timer, up to 7 bar, with vacuum back suction, incl. Accessories The DC 150 is recommended for manual timed dosing that does not require timer control. The dosing process is activated by pressing the foot pedal. This model is more cost effective than devices equipped with timers and provides a continuous dosing process with the same high quality. Suitable for a wide range of materials. The DC 150 is equipped with a vacuum back suction function to prevent dripping of low viscosity materials.
Быстрый просмотр
volumetric dosing and mixing of 2k components of 0.01 cu. see including controller
| Вес | 1,6 г |
| Температура | 10 ° C - 40 ° C |
| Напряжение | 18-24 В постоянного тока |
| Технические подробности | 5 кг |
| Вход материала | 1/8 дюйма |
| Материал смачиваемых частей | анодированный алюминий |
| Объем дозирования (мин.) | 0,008 мл |
| Материал на выходе | Люэр-Лок |
| Скорость потока | 1) |
| Давление жидкости (макс.) | 20 бар |
| Рабочее давление (мин.) | 20 бар |
| Технические особенности | - Точное дозирование по объему |
| Эксплуатация | электрическая |
Characteristics
Быстрый просмотр
volumetric dosing of 2k components, 0.03 cu. see controller included
| Вес | 1,9 г |
| Температура | 10 ° C - 40 ° C |
| Напряжение | 18-24 В постоянного тока |
| Технические подробности | 7 кг |
| Вход материала | 1/4 дюйма |
| Материал смачиваемых частей | анодированный алюминий |
| Объем дозирования (мин.) | 0,03 мл |
| Скорость потока | 1) |
| Давление жидкости (макс.) | 40 бар |
| Рабочее давление (мин.) | 0 бар |
| Выход материала | Смесительная трубка M-50D |
| Технические особенности | - Точное дозирование по объему |
| Эксплуатация | электрическая |
Characteristics
Быстрый просмотр
Robots may only be operated in a suitable protective housing in order to issue the EC Declaration of Conformity (CE marking) in accordance with the Machinery Directive. External dimensions without handles and fixtures (junction box, cable ducts, light grids, etc.)