Быстрый просмотр
The system contains a spray head, a detergent tank, a WIP pump and three ports for warm water, cold water and purified water, which are installed in the WIP rack. The system will cycle through the water types and add detergent if needed. After the cleaning is completed, the system is flushed with purified water to complete the cleaning.
Быстрый просмотр
The option for the PTK tablet press, the built-in powder loader, works in the same way as the standard powder loader, however the control systems are built into the PTK machine itself. This gives a more compact system in confined spaces.
Быстрый просмотр
The PTK torque motor replaces the traditional belt driven motor and gearbox. This reduces heat generation and noise. Additional heat reduction is possible by selecting a water-cooled motor with intermittent water supply. The volume of water supply must be prepared at the customer's site.
Быстрый просмотр
Magnesium is supplied from a separate rack. The rack consists of a magnesium hopper and a control cabinet. Rollers are used to facilitate movement. Magnesium is supplied to the spray block, which is installed at the base of the feeder.
Быстрый просмотр
As an option for the PTK tablet press, the powder feeder automatically feeds the powder into the main powder hopper of the machine using vacuum. If the level of powder in the hopper is low, a signal activated by the sensor starts the vacuum pump, which starts the powder supply.
Быстрый просмотр
The PTK tablet press option with an open feeder is designed for pellets with good fluidity or for those materials that are not fed efficiently through a mechanical feeder (force feed). Switching between mechanical feeder and open feeder is easy. Both types of feeders use the same hopper.
Быстрый просмотр
IFH is an option for the PTK tablet press, an intermediate powder hopper that is mounted on top of the PTK machine. This option is useful where powders require additional agitation before entering the powder feed tube.
Быстрый просмотр
The PTK tablet press duster option is a highly efficient vibrating spiral that moves the tablets up or down to remove dust by vibration. The machine is also equipped with a vibration control system to change the vibration frequency so that it can be easily optimized. Switching on and off the machine is carried out from the control panel of the PTK press or independently.
Быстрый просмотр
The flexible and modular Kraemer UTS tablet testing system fully automatically measures the weight, thickness, diameter and hardness of round tablets, oblong tablets, capsules and similar products. The system can be stand-alone or connected to a machine. When connected to the machine, the sampling device will send control signals to the PTK machine to control the machine settings.
Быстрый просмотр
The PTK Tablet Press Calibration Kit option allows you to calibrate the load cells installed on the PTK machine. The kit includes some elements for mounting the load cell and a certificate of conformity to national calibration standards.
Быстрый просмотр
The metal detector is an option for the PTK tablet press. Most pharmaceutical tablets and capsules can be tested in the MET 30+ with an aperture size of 95mm W x 38mm H, providing calibrated sensitivity of 0.3mm Fe, 0.35mm Nfe and 0.5mm SST. 316 steel. For smaller products (typically no larger than 8 mm diameter), the MET 30+ can also be used with dimensions of 95 mm W x 22 mm H, providing an efficiency of 0.25 mm Fe, 0.3 mm Nfe and 0.39 mm StSt 316
Быстрый просмотр
Provides safe handling and easy transport of detachable turrets for installation, removal or maintenance.
Быстрый просмотр
This pill duster and metal detector saves valuable production time by combining two functions into one.
