Быстрый просмотр
With the help of the RT-F1300N rotary table, round shapes can be dispensed conveniently into hard-to-reach places. Easily adjustable, tiltable Z-axis provides controlled, fixed-angle dosing rotation. For example, the material to be dosed may be applied to a vertical inner or outer wall of a cylindrical component. The turntable is used for dosing adhesives, silicones, greases and lubricants and is fully programmable in terms of speed, wheel diameter, cycle and dosing time. VIEWEG's wide range of accessories allows the installation of cartridges and valves in the Z direction. VIEWEG also offers a range of dispensers, valves and valve controllers. We will be happy to advise you.
Быстрый просмотр
The RINA spray dryer models operate continuously by spraying suspensions in a vertical drying tower. This solution is particularly recommended for heat sensitive pumpable products that require gentle and prolonged drying to obtain a dry powder of fine particles that can be further encapsulated.
Быстрый просмотр
The RINA SRP models are vertical decanter industrial centrifuges with a tubular drum, rotating at a very high speed (15.000G mini). They are used for solid-liquid separation (C version) or liquid-liquid separation (S version).
| Ø барабана (мм) | 125 |
| Высота барабана, мм | 735 |
| Объем лт . | 8 |
| Скорость об / мин | 14700 |
| Мощность мотора, л.с. | 5 |
| Ø барабана, дюйм | 4.92 |
| Высота барабана в дюймах | 29 |
| Объем Cu. Фут . | 0,27 |
Characteristics
Быстрый просмотр
MACFUGE manual discharge disc centrifuges are designed and built to separate mixtures of liquids of varying specific gravity and solids. These machines are simple and offer a variety of configurations to suit process requirements.
| Бак | Скорость вращения 7,800 об / мин |
| Двигатель | Мощность 5,5 кВт |
| Размеры | 500 X 900 X в. Мм. 1050 |
Characteristics
Быстрый просмотр
The SG Series models are designed to insert a desiccant into cans. Desiccant sachets fed from a roll are detected by optical sensors, cut to length and inserted into jars. It is possible to insert different desiccants without having to change format parts.
| Другие настройки | 2 |
| Размеры | 1500 (Д) x 800 (Ш) x 1800 (В) мм. |
| Вес нетто | 150 кг |
| - Производительность | Макс. 120 банок в минуту в зависимости от размера банки и скорости подачи |
| Размеры банок | диаметр 30-100 мм, высота 40-200 мм. |
| Размер пакета с осушителем | до 50 (Ш) x 100 (Д) мм. |
Characteristics
Быстрый просмотр
The fluidization hopper is equipped with a fluidization cone made of a special porous material. The product flow in the form of a sticky or non-volatile powder is optimized by the compressed gas that passes through the pores of the cone. When handling flammable products, an inert gas can be used.
Быстрый просмотр
PTK Fluidized Bed Dryers of the PFB series are designed to close the system - powder transfer in each automated process is carried out by means of a vacuum conveyor and an antistatic hose or tube in sanitary design.
Быстрый просмотр
IC-120 is a continuous capping machine for cans. The lids are oriented and fed by a vibrating bunker on a signal from a sensor that detects the can. The screwing station closes cans with lids using rotating capping heads with a given torque.
The model is designed to close containers with both screw-on and tight-fitting lids. Containers with misaligned, skewed or missing lids are automatically rejected.| Другие настройки | 2 |
| Размеры | 2400 (Д) x 1000 (Ш) x 1800 (В) мм |
| Вес нетто | 900кг |
| - Производительность | Макс. 100 банок в минуту в зависимости от формы и размера крышки |
| Размеры банок | диаметр 30-100 мм, высота 40-200 мм |
| Размеры крышек | диаметр 30-99 мм, высота 10-30 мм |
Characteristics
Быстрый просмотр
volumetric dosing of 2k components, 0.03 cu. see controller included
| Вес | 1,9 г |
| Температура | 10 ° C - 40 ° C |
| Напряжение | 18-24 В постоянного тока |
| Технические подробности | 7 кг |
| Вход материала | 1/4 дюйма |
| Материал смачиваемых частей | анодированный алюминий |
| Объем дозирования (мин.) | 0,03 мл |
| Скорость потока | 1) |
| Давление жидкости (макс.) | 40 бар |
| Рабочее давление (мин.) | 0 бар |
| Выход материала | Смесительная трубка M-50D |
| Технические особенности | - Точное дозирование по объему |
| Эксплуатация | электрическая |
Characteristics
Быстрый просмотр
volumetric dosing and mixing of 2k components of 0.01 cu. see including controller
| Вес | 1,6 г |
| Температура | 10 ° C - 40 ° C |
| Напряжение | 18-24 В постоянного тока |
| Технические подробности | 5 кг |
| Вход материала | 1/8 дюйма |
| Материал смачиваемых частей | анодированный алюминий |
| Объем дозирования (мин.) | 0,008 мл |
| Материал на выходе | Люэр-Лок |
| Скорость потока | 1) |
| Давление жидкости (макс.) | 20 бар |
| Рабочее давление (мин.) | 20 бар |
| Технические особенности | - Точное дозирование по объему |
| Эксплуатация | электрическая |
Characteristics
Быстрый просмотр
Dosing is a common practice in the pharmaceutical industry where active pharmaceutical ingredients (APIs) and powder excipients must be precisely dosed into IBCs (bins). Often these activities are still performed openly inside a laminar flow cabin, causing problems for the operator due to difficult manual handling, exposure to dust and high risks of cross contamination. Dec's safe bin filling solution typically includes a PTS Powder Transfer System® mounted on the container being filled, avoiding gravity loading and the need for a second floor, work platform or drum hoist/tilt column. The PTS can be equipped with an optional breathing filter, allowing the IBC to release pressure during filling without polluting the environment and exhaust system. Thanks to this solution, the IBC (bin) does not require additional attachments that can be installed on the floor scales for final weight control.
Быстрый просмотр
The SC-40 reciprocating machine is designed to close cans with lids. The lids are oriented and fed by a vibrating bunker on a signal from a sensor that detects the can. The screwing station closes cans with lids using rotating capping heads with a given torque.
The model is designed to close containers with both screw-on and tight-fitting lids. Containers with misaligned, skewed or missing lids are automatically rejected.| Другие настройки | 2 |
| Размеры | 2840 (Д) x 1300 (Ш) x 2050 (В) мм |
| Вес нетто | 1300кг |
| - Производительность | Макс. 40 банок в минуту в зависимости от формы и размера крышки |
| Размеры банок | диаметр 30-100 мм, высота 40-200 мм |
| Размеры крышек | диаметр 30-100 мм, высота 10-30 мм |
Characteristics
Быстрый просмотр
MACFUGE manual discharge disc centrifuges are designed and built to separate mixtures of liquids of varying specific gravity and solids. These machines are simple and offer a variety of configurations to suit process requirements.
| Бак | Скорость вращения 4.700 об / мин |
| Двигатель | Мощность 22 кВт |
| Размеры | мм 950 X 1500 X в. 2100 |
Characteristics
Быстрый просмотр
Dec offers a range of small PTSs for transporting small quantities of powder with chamber volumes typically between 10g and 200g. The principle of operation is based on PTS technology. The MPTS can be used either to load small quantities into process equipment such as a reactor, or for in-process sampling. The MPTS is very compact and can be easily installed on small equipment such as a glass reactor for a pilot or kilolab plant, or it can be integrated into an isolator. The system can be easily disassembled and can be made for CIP, can be used in sterile conditions. The MPTS can also be supplied with an adjustable chamber for volume dosing.
Быстрый просмотр
Dec has developed economical solutions for dust-free and airtight unloading of bins without the use of gravity unloading. The bin does not need to be raised above the loadable equipment. It can be emptied using the PTS Powder Transfer System®, which mounts directly to the equipment being filled such as a compactor, granulator or tablet press, eliminating the need for a second floor or bin lifting column. With its low conveying speed and dense phase operation, PTS ensures that there is no powder segregation or powder abrasion during transfer, eliminating the risk of product separation normally associated with loading chutes. Multiple pieces of equipment can be filled with a single unloading station, reducing the overall footprint and investment. Dec offers different designs depending on the level of containment. The bin will be mounted on a dump frame equipped with a docking system ranging from a simple gasket for low sealing to a split valve system for full sealing.
Быстрый просмотр
The M2 tangential filtration system is a cross flow filtration applicable to both R&D and industrial filtration. The advantages of tangential flow filtration include high product recovery and high filtration speed. The TFF plant is suitable for concentration, clarification, diafiltration and extraction processes.
| Габариты (Ш x В x Г мм.) | 2250x1500x785 |
| Тип сосуда | с рубашкой |
| Рабочий объем сосуда | 50 л (доступны другие объемы) |
| Типы мембарн | керамические |
| Давление жидкости | 25 бар (нф/оо) |
| Температура | 45 °c (нф/оо) |
Characteristics
Быстрый просмотр
COVISS is a tablet/capsule visual inspection system that has been designed to the highest regulatory standards required for visual inspection. COVISS detects serious defects in products, incl. chipped, dented capsules, or black spots in the softgels in the pill counter as they move through the vibrating chutes. Upon detection of a can containing any defective product, it is removed from the conveyor. With an amazingly simple setup method and the ability to integrate with any brand of existing tablet counter, COVISS is a must-have control system for all tablet/capsule packaging operations. 21 CFR Part 11 compliance available
Быстрый просмотр
Hanningfield Uni-Vac vacuum conveyors are designed as a safe and convenient way to transport powder. - Automate and speed up the loading process - Dust-proof transfer of material from A to B - Reduced manual handling (horizontal and vertical transfer) - Can be installed in line for subsequent feeding (gravity feeding or vacuum pumping)
| Объем | Емкость бункера: 30 литров |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр бункера | 254 мм |
| Высота бункера | 1090 мм |
| Стандартный диаметр шланга | 1.5 дюйма |
Characteristics
Быстрый просмотр
Model AC-120 is designed for can orientation and automatic air cleaning. The cans coming from the hopper are blown with jets of high-speed ionized air using nozzles.
Particles after cleaning are collected by a collector and removed, and oriented and cleaned cans at the exit are captured by a side belt conveyor and unloaded from the machine in a vertical position.| Другие настройки | 2 |
| Размеры | 1490 (Д) x 520 (Ш) x 1200 (В) мм. |
| Вес нетто | 400 кг |
| - Производительность | Макс. 120 банок в минуту в зависимости от формы и размера банки |
| Размеры банок | диаметр 30-100 мм, высота 40-200 мм. |
Characteristics
Быстрый просмотр
MACFUGE manual discharge disc centrifuges are designed and built to separate mixtures of liquids of varying specific gravity and solids. These machines are simple and offer a variety of configurations to suit process requirements.
| Бак | Скорость вращения 9.600 об / мин |
| Двигатель | мощность 4 кВт |
| Размеры | мм 500 X 800 X в. 1000 |
Characteristics
