Быстрый просмотр
CIP rack and nozzles are an option for the PTK high speed mixer. High pressure water is sprayed through specially placed jets to clean the inside of the tank. The nozzles are easy to remove and reassemble.
Быстрый просмотр
The vacuum conveyor uses negative pressure to gently capture materials for transfer. This process works by creating a pressure differential, pressure equalization creates suction. This principle is used when air is evacuated from a pipeline, creating a negative pressure that has the power to draw solid particles through the pipeline into a vacuum conveyor.
Быстрый просмотр
The heat exchanger is an option for the PTK Fluid Bed Dryer. The air is heated through this device and fed into the system. Directly before the blower, pre- and middle filters are installed, which filter the outside air supplied to the heat exchanger.
Быстрый просмотр
The WIP system is an option for the PTK tablet coating machine. The WIP (Wash In Place) system automatically cleans every part of the coater. 5 nozzles are equipped to clean the inside/outside of the coating drum and the air intake/exhaust lines.
Быстрый просмотр
The liquid tank is an option for the PTK tablet coater. The (liquid) solution is contained in this container and pumped to the spray guns (The pumps are located in the control cabinet). The low height of the structure simplifies maintenance.
Быстрый просмотр
As an option for the PTK tablet coater, the Hepa filter is equipped with a heat exchanger or dust collector and the air is filtered up to 99.9% (EN 1882 H13). There is also a pressure gauge to indicate when the filter needs to be cleaned/replaced.
Быстрый просмотр
Coating drum rack is designed to store PC-L series drums and plenums.
Быстрый просмотр
The rotary actuator, controlled by compressed air, precisely regulates the air flow to the coater by changing the position of the damper.
Быстрый просмотр
The device for removing foreign substances generated by drying the coating solution in the coating drum removes them with a vacuum and collects them in a dust collector.
Быстрый просмотр
The pump rack supplies fluid from the fluid reservoir to the fluidized bed sprayer. By using a special hose for the peristaltic pump head, it can be used in a hygienic environment without harmful emissions. Equipped with a servomotor, it delivers liquid with sufficient force even at low rotation speed, and intuitive visibility is provided by our own program.
Быстрый просмотр
The PTK tablet press duster option is a highly efficient vibrating spiral that moves the tablets up or down to remove dust by vibration. The machine is also equipped with a vibration control system to change the vibration frequency so that it can be easily optimized. Switching on and off the machine is carried out from the control panel of the PTK press or independently.
Быстрый просмотр
The metal detector is an option for the PTK tablet press. Most pharmaceutical tablets and capsules can be tested in the MET 30+ with an aperture size of 95mm W x 38mm H, providing calibrated sensitivity of 0.3mm Fe, 0.35mm Nfe and 0.5mm SST. 316 steel. For smaller products (typically no larger than 8 mm diameter), the MET 30+ can also be used with dimensions of 95 mm W x 22 mm H, providing an efficiency of 0.25 mm Fe, 0.3 mm Nfe and 0.39 mm StSt 316
Быстрый просмотр
This pill duster and metal detector saves valuable production time by combining two functions into one.
Быстрый просмотр
As an option for the PTK tablet press, the powder feeder automatically feeds the powder into the main powder hopper of the machine using vacuum. If the level of powder in the hopper is low, a signal activated by the sensor starts the vacuum pump, which starts the powder supply.
Быстрый просмотр
The PTK tablet press option with an open feeder is designed for pellets with good fluidity or for those materials that are not fed efficiently through a mechanical feeder (force feed). Switching between mechanical feeder and open feeder is easy. Both types of feeders use the same hopper.
Быстрый просмотр
The flexible and modular Kraemer UTS tablet testing system fully automatically measures the weight, thickness, diameter and hardness of round tablets, oblong tablets, capsules and similar products. The system can be stand-alone or connected to a machine. When connected to the machine, the sampling device will send control signals to the PTK machine to control the machine settings.
Быстрый просмотр
The option for the PTK tablet press, the built-in powder loader, works in the same way as the standard powder loader, however the control systems are built into the PTK machine itself. This gives a more compact system in confined spaces.
Быстрый просмотр
The PTK Tablet Press Calibration Kit option allows you to calibrate the load cells installed on the PTK machine. The kit includes some elements for mounting the load cell and a certificate of conformity to national calibration standards.
Быстрый просмотр
IFH is an option for the PTK tablet press, an intermediate powder hopper that is mounted on top of the PTK machine. This option is useful where powders require additional agitation before entering the powder feed tube.
Быстрый просмотр
The system contains a spray head, a detergent tank, a WIP pump and three ports for warm water, cold water and purified water, which are installed in the WIP rack. The system will cycle through the water types and add detergent if needed. After the cleaning is completed, the system is flushed with purified water to complete the cleaning.