Быстрый просмотр
Pneumatic cylinder opening of the tank lid is an option for the PTK high speed mixer. The container lid is automatically lifted by an air cylinder at the touch of a button.
Быстрый просмотр
The double jacket is an option for the high speed PTK mixer. The container has a double jacket. Water or steam is supplied to the wall cavity to control the temperature of the container.
Быстрый просмотр
Agitator impeller lift is an option for the PTK high speed mixer. After the WIP process, the air cylinder raises the impeller to facilitate drying.
Быстрый просмотр
Tank lamp is an option for the PTK High Speed Mixer. There is an LED light on the lid of the jar to check the powder while mixing. This lamp is also useful when the operator is checking the powder through the window on the machine. It is semi-permanent and the lamp cover can be removed separately. Thus, cleaning and maintenance are simplified.
Быстрый просмотр
Wet grinding of agglomerates after mixing or sizing of dry granules after fluid bed drying can be performed using the same mill. Screens are available in various sizes and geometries. The cone mill is available as an integrated system or a stand-alone type.
Быстрый просмотр
The vacuum conveyor uses negative pressure to gently capture materials for transfer. This process works by creating a pressure differential, pressure equalization creates suction. This principle is used when air is evacuated from a pipeline, creating a negative pressure that has the power to draw solid particles through the pipeline into a vacuum conveyor.
Быстрый просмотр
The heat exchanger is an option for the PTK Fluid Bed Dryer. The air is heated through this device and fed into the system. Directly before the blower, pre- and middle filters are installed, which filter the outside air supplied to the heat exchanger.
Быстрый просмотр
The WIP system is an option for the PTK tablet coating machine. The WIP (Wash In Place) system automatically cleans every part of the coater. 5 nozzles are equipped to clean the inside/outside of the coating drum and the air intake/exhaust lines.
Быстрый просмотр
The liquid tank is an option for the PTK tablet coater. The (liquid) solution is contained in this container and pumped to the spray guns (The pumps are located in the control cabinet). The low height of the structure simplifies maintenance.
Быстрый просмотр
As an option for the PTK tablet coater, the Hepa filter is equipped with a heat exchanger or dust collector and the air is filtered up to 99.9% (EN 1882 H13). There is also a pressure gauge to indicate when the filter needs to be cleaned/replaced.
Быстрый просмотр
The device generates heated air to feed the fluidized bed dryer. This air handling unit contains a coil steam heating system, the machine will control the air temperature and adjust the steam to maintain the desired temperature. Contains pre-filter, middle filter and HEPA filter.
Быстрый просмотр
Coating drum rack is designed to store PC-L series drums and plenums.
Быстрый просмотр
The rotary actuator, controlled by compressed air, precisely regulates the air flow to the coater by changing the position of the damper.
Быстрый просмотр
The device for removing foreign substances generated by drying the coating solution in the coating drum removes them with a vacuum and collects them in a dust collector.
Быстрый просмотр
The pump rack supplies fluid from the fluid reservoir to the fluidized bed sprayer. By using a special hose for the peristaltic pump head, it can be used in a hygienic environment without harmful emissions. Equipped with a servomotor, it delivers liquid with sufficient force even at low rotation speed, and intuitive visibility is provided by our own program.
Быстрый просмотр
The PTK tablet press duster option is a highly efficient vibrating spiral that moves the tablets up or down to remove dust by vibration. The machine is also equipped with a vibration control system to change the vibration frequency so that it can be easily optimized. Switching on and off the machine is carried out from the control panel of the PTK press or independently.
Быстрый просмотр
The metal detector is an option for the PTK tablet press. Most pharmaceutical tablets and capsules can be tested in the MET 30+ with an aperture size of 95mm W x 38mm H, providing calibrated sensitivity of 0.3mm Fe, 0.35mm Nfe and 0.5mm SST. 316 steel. For smaller products (typically no larger than 8 mm diameter), the MET 30+ can also be used with dimensions of 95 mm W x 22 mm H, providing an efficiency of 0.25 mm Fe, 0.3 mm Nfe and 0.39 mm StSt 316
Быстрый просмотр
This pill duster and metal detector saves valuable production time by combining two functions into one.
Быстрый просмотр
Dust collector is an option for the PTK capsule filling machine. Dust is sucked out of the machine and dust collector through this device, which helps the machine to be neat and clean.
Быстрый просмотр
As an option for the PTK tablet press, the powder feeder automatically feeds the powder into the main powder hopper of the machine using vacuum. If the level of powder in the hopper is low, a signal activated by the sensor starts the vacuum pump, which starts the powder supply.