Быстрый просмотр
Pneumatic cylinder opening of the tank lid is an option for the PTK high speed mixer. The container lid is automatically lifted by an air cylinder at the touch of a button.
Быстрый просмотр
The powder loader is an option for the PTK capsule filling machine. The vacuum effect automatically feeds the powder into the main hopper. If there is not enough powder in the hopper, a signal activated by the sensor starts the vacuum pump, which starts the powder supply. The control panel and powder loader are combined and consist of a hopper and a suction pipe, as well as an antistatic connecting hose and an air hose.
Быстрый просмотр
As an option for the PTK tablet press, the powder feeder automatically feeds the powder into the main powder hopper of the machine using vacuum. If the level of powder in the hopper is low, a signal activated by the sensor starts the vacuum pump, which starts the powder supply.
Быстрый просмотр
Removes external dust from finished capsules and transports them upwards for discharge into the product container.
| Размеры машины [мм] | 500 x 800 x 2,218 |
| Параметры источника питания | 220/380 В перем. тока, 3 фазы, 50/60 Гц |
| Вес машины [кг] | 340 |
| Мощность привода [кВт] | 0,4 |
| Макс. производительность [капсул/час] | 420,000 |
| Параметры элементов управления | 24 В постоянного тока |
Characteristics
Быстрый просмотр
The option for the PTK tablet press, the built-in powder loader, works in the same way as the standard powder loader, however the control systems are built into the PTK machine itself. This gives a more compact system in confined spaces.
Быстрый просмотр
The system contains a spray head, a detergent tank, a WIP pump and three ports for warm water, cold water and purified water, which are installed in the WIP rack. The system will cycle through the water types and add detergent if needed. After the cleaning is completed, the system is flushed with purified water to complete the cleaning.
Быстрый просмотр
Dust collector is an option for the PTK capsule filling machine. Dust is sucked out of the machine and dust collector through this device, which helps the machine to be neat and clean.
Быстрый просмотр
The double jacket is an option for the high speed PTK mixer. The container has a double jacket. Water or steam is supplied to the wall cavity to control the temperature of the container.
Быстрый просмотр
Быстрый просмотр
The device for removing foreign substances generated by drying the coating solution in the coating drum removes them with a vacuum and collects them in a dust collector.
Быстрый просмотр
Replacement parts are an option for the PTK capsule filling machine. The machine can be configured for any size capsule with a range of replacement parts available. The capsule filling device is designed to be easily replaced by qualified operators.
Быстрый просмотр
Tank lamp is an option for the PTK High Speed Mixer. There is an LED light on the lid of the jar to check the powder while mixing. This lamp is also useful when the operator is checking the powder through the window on the machine. It is semi-permanent and the lamp cover can be removed separately. Thus, cleaning and maintenance are simplified.
Быстрый просмотр
Provides safe handling and easy transport of detachable turrets for installation, removal or maintenance.
Быстрый просмотр
The capsule polisher is an option for the PTK capsule filling machine. Dust on manufactured capsules can be removed with this capsule polishing machine.
Быстрый просмотр
The PTK torque motor replaces the traditional belt driven motor and gearbox. This reduces heat generation and noise. Additional heat reduction is possible by selecting a water-cooled motor with intermittent water supply. The volume of water supply must be prepared at the customer's site.
Быстрый просмотр
The WIP system is an option for the PTK tablet coating machine. The WIP (Wash In Place) system automatically cleans every part of the coater. 5 nozzles are equipped to clean the inside/outside of the coating drum and the air intake/exhaust lines.
Быстрый просмотр
Magnesium is supplied from a separate rack. The rack consists of a magnesium hopper and a control cabinet. Rollers are used to facilitate movement. Magnesium is supplied to the spray block, which is installed at the base of the feeder.
Быстрый просмотр
The device for rejecting incorrectly installed capsules is located behind the feeder. If split or damaged capsules are blocking the channel, the device will purge air to remove the bad capsules from the supply port.
Быстрый просмотр
As an option for the PTK capsule filling machine, the pellet filling machine is designed to fill hard gelatin capsules with pellets. It is designed to minimize weight fluctuation so pellet feed can be easily adjusted to achieve a given weight.
Быстрый просмотр
Wet grinding of agglomerates after mixing or sizing of dry granules after fluid bed drying can be performed using the same mill. Screens are available in various sizes and geometries. The cone mill is available as an integrated system or a stand-alone type.
