Быстрый просмотр
The metal detector is an option for the PTK tablet press. Most pharmaceutical tablets and capsules can be tested in the MET 30+ with an aperture size of 95mm W x 38mm H, providing calibrated sensitivity of 0.3mm Fe, 0.35mm Nfe and 0.5mm SST. 316 steel. For smaller products (typically no larger than 8 mm diameter), the MET 30+ can also be used with dimensions of 95 mm W x 22 mm H, providing an efficiency of 0.25 mm Fe, 0.3 mm Nfe and 0.39 mm StSt 316
Быстрый просмотр
The liquid tank is an option for the PTK tablet coater. The (liquid) solution is contained in this container and pumped to the spray guns (The pumps are located in the control cabinet). The low height of the structure simplifies maintenance.
Быстрый просмотр
The device for rejecting incorrectly installed capsules is located behind the feeder. If split or damaged capsules are blocking the channel, the device will purge air to remove the bad capsules from the supply port.
Быстрый просмотр
As an option for the PTK capsule filling machine, the pellet filling machine is designed to fill hard gelatin capsules with pellets. It is designed to minimize weight fluctuation so pellet feed can be easily adjusted to achieve a given weight.
Быстрый просмотр
The rotary actuator, controlled by compressed air, precisely regulates the air flow to the coater by changing the position of the damper.
Быстрый просмотр
As an option for the PTK tablet coater, the Hepa filter is equipped with a heat exchanger or dust collector and the air is filtered up to 99.9% (EN 1882 H13). There is also a pressure gauge to indicate when the filter needs to be cleaned/replaced.
Быстрый просмотр
The capsule loader is an option for the PTK capsule filling machine. Designed to lift the capsules to prevent them from separating and crushing during loading. Automatic operation is controlled by a sensor.
Быстрый просмотр
The tablet feeder uses innovative orientation and separation technology to accurately dispense tablets into hard gelatin capsules. Encapsulation of single or multiple tablets as well as tablet/powder/granule combinations is made possible by the addition of this precise device.
Быстрый просмотр
The heat exchanger is an option for the PTK Fluid Bed Dryer. The air is heated through this device and fed into the system. Directly before the blower, pre- and middle filters are installed, which filter the outside air supplied to the heat exchanger.
Быстрый просмотр
The PTK tablet press duster option is a highly efficient vibrating spiral that moves the tablets up or down to remove dust by vibration. The machine is also equipped with a vibration control system to change the vibration frequency so that it can be easily optimized. Switching on and off the machine is carried out from the control panel of the PTK press or independently.
Быстрый просмотр
The pump rack supplies fluid from the fluid reservoir to the fluidized bed sprayer. By using a special hose for the peristaltic pump head, it can be used in a hygienic environment without harmful emissions. Equipped with a servomotor, it delivers liquid with sufficient force even at low rotation speed, and intuitive visibility is provided by our own program.
Быстрый просмотр
Cone Mill (Independent Type) The cone mill is installed directly below the product discharge point, which allows the product to be ground to a specified size when discharging by selecting the correct sieve type. -Servo motor control for driving part -Compact structure with built-in servo motor -Easy and fast touch screen operation -Monitoring of current position and torque values on screen with graphical display -Providing screens of various types and sizes, including screens for wet and dry granulation. -Easy connection for wet or dry grinding mill together with vacuum conveyor and hopper
Быстрый просмотр
As an option for the PTK High Speed Mixer, the liquid binder is contained separately in its own tank and fed into the spray nozzle. The speed of the pump is controlled by an inverter or compressed air, which regulates the fluid flow.
Быстрый просмотр
IFH is an option for the PTK tablet press, an intermediate powder hopper that is mounted on top of the PTK machine. This option is useful where powders require additional agitation before entering the powder feed tube.
Быстрый просмотр
The PFB series is rated at 12 bar to protect the user in the event of an explosion. An explosion proof valve (QASV) is also installed on the inlet and outlet ports. It provides a safe environment even with explosive flames and pressures.
Быстрый просмотр
Быстрый просмотр
Medium Volume Square Containers (IBC) are manufactured to specification with standard capacities ranging from 150 to 1000 liters in round and square geometries.
Быстрый просмотр
The flexible and modular Kraemer UTS tablet testing system fully automatically measures the weight, thickness, diameter and hardness of round tablets, oblong tablets, capsules and similar products. The system can be stand-alone or connected to a machine. When connected to the machine, the sampling device will send control signals to the PTK machine to control the machine settings.
Быстрый просмотр
The PTK tablet press option with an open feeder is designed for pellets with good fluidity or for those materials that are not fed efficiently through a mechanical feeder (force feed). Switching between mechanical feeder and open feeder is easy. Both types of feeders use the same hopper.
Быстрый просмотр
The vacuum conveyor uses negative pressure to gently capture materials for transfer. This process works by creating a pressure differential, pressure equalization creates suction. This principle is used when air is evacuated from a pipeline, creating a negative pressure that has the power to draw solid particles through the pipeline into a vacuum conveyor.
