Быстрый просмотр
MACFUGE manual discharge disc centrifuges are designed and built to separate mixtures of liquids of varying specific gravity and solids. These machines are simple and offer a variety of configurations to suit process requirements.
| Бак | Скорость вращения 6,700 об / мин. |
| Двигатель | Мощность 11 ÷ 15 кВт |
| Размеры | мм 710 X 1200 X в. 1400 |
Characteristics
Быстрый просмотр
The device for removing foreign substances generated by drying the coating solution in the coating drum removes them with a vacuum and collects them in a dust collector.
Быстрый просмотр
The pump rack supplies fluid from the fluid reservoir to the fluidized bed sprayer. By using a special hose for the peristaltic pump head, it can be used in a hygienic environment without harmful emissions. Equipped with a servomotor, it delivers liquid with sufficient force even at low rotation speed, and intuitive visibility is provided by our own program.
Быстрый просмотр
The capsule loader is an option for the PTK capsule filling machine. Designed to lift the capsules to prevent them from separating and crushing during loading. Automatic operation is controlled by a sensor.
Быстрый просмотр
Dust collector is an option for the PTK capsule filling machine. Dust is sucked out of the machine and dust collector through this device, which helps the machine to be neat and clean.
Быстрый просмотр
Pneumatic, especially suitable for abrasive and two-component media Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/lubricants, silicone (RTV)/gels, solder masks/pastes/PVA , solvent
| Вес | 90 г |
| Длина | 75 мм |
| Расход | 1980 мл / мин (вода, 4 бара) |
| Работа | пневматическая (давление и время) |
| Привод | пневматический |
| Технические подробности | 0,31 кг |
| Вход материала | люэровский наконечник (мама) |
| Диапазон вязкости жидкости (макс.) | 50,000 мПа · с. |
| Объем дозирования (мин.) | 0,0075 мл |
| Заполненные материалы | + |
| Материал на выходе | люэровский наконечник (папа) |
| Давление жидкости (макс.) | 4,0 бар |
| Материал смачиваемой части | ПЭ |
| Материал | ПЭ |
Characteristics
Быстрый просмотр
The powder loader is an option for the PTK capsule filling machine. The vacuum effect automatically feeds the powder into the main hopper. If there is not enough powder in the hopper, a signal activated by the sensor starts the vacuum pump, which starts the powder supply. The control panel and powder loader are combined and consist of a hopper and a suction pipe, as well as an antistatic connecting hose and an air hose.
Быстрый просмотр
The device for rejecting incorrectly installed capsules is located behind the feeder. If split or damaged capsules are blocking the channel, the device will purge air to remove the bad capsules from the supply port.
Быстрый просмотр
The heat exchanger is an option for the PTK Fluid Bed Dryer. The air is heated through this device and fed into the system. Directly before the blower, pre- and middle filters are installed, which filter the outside air supplied to the heat exchanger.
Быстрый просмотр
Our self-contained, ready-to-use design provides a functional clean space anywhere, anytime. Whether you want to expand production, R&D or manufacturing capacity at an existing facility, in a remote location or around the world, MCR (mobile clean rooms) can be transported and fully commissioned faster than other clean room options. Our pre-engineered MCRs provide a fast and flexible cleanroom manufacturing space without the significant time and cost associated with more traditional cleanroom options.
Быстрый просмотр
MACFUGE disc centrifuges with automatic unloading are designed and manufactured to separate a mixture of liquids with different specific gravity and solids.
| Бак | Скорость вращения 7.600 об / мин |
| Двигатель | мощность 15 кВт |
| Размеры | 760 X 1250 X в. Мм. 1600 |
Characteristics
Быстрый просмотр
As an option for the PTK tablet press, the powder feeder automatically feeds the powder into the main powder hopper of the machine using vacuum. If the level of powder in the hopper is low, a signal activated by the sensor starts the vacuum pump, which starts the powder supply.
Быстрый просмотр
The lightweight rotary valve is suitable for the pharmaceutical, chemical and food industries. - Delivers large volumes of powder at a controlled rate. - cGMP design - Easy to install - top and bottom halves connections can be supplied to match customer's existing ones. The valve is powered by a pneumatic actuator requiring a connection to compressed air, which means no wiring and simplifies valve testing in ATEX areas. - All parts are easily disassembled for easy cleaning and replacement of wear parts. - All contact parts are made of 316L steel, and non-metal parts are FDA compliant. Full documentation is provided with each valve. - Can be supplied with a small gap between rotor and gasket to prevent gasket friction with each revolution.
| Размеры | DN80, DN100, DN150, DN200, DN250, DN300, DN350, DN400 |
| Материалы | корпус и ротор нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
The vacuum conveyor uses negative pressure to gently capture materials for transfer. This process works by creating a pressure differential, pressure equalization creates suction. This principle is used when air is evacuated from a pipeline, creating a negative pressure that has the power to draw solid particles through the pipeline into a vacuum conveyor.
Быстрый просмотр
MACFUGE disc centrifuges with automatic unloading are designed and manufactured to separate a mixture of liquids with different specific gravity and solids.
| Бак | Скорость вращения 5,800 об / мин |
| Двигатель | Мощность 22 кВт |
| Размеры | 1000 X 1500 X в. Мм. 2000 г. |
Characteristics
Быстрый просмотр
Wet grinding of agglomerates after mixing or sizing of dry granules after fluid bed drying can be performed using the same mill. Screens are available in various sizes and geometries. The cone mill is available as an integrated system or a stand-alone type.
Быстрый просмотр
MACFUGE disc centrifuges with automatic unloading are designed and manufactured to separate a mixture of liquids with different specific gravity and solids.
| Бак | Скорость вращения 5,300 об / мин |
| Двигатель | Мощность 30 кВт |
| Размеры | 1300 X 1900 X в. Мм. 2300 |
Characteristics
Быстрый просмотр
The Hanningfield Uni-Dust centrifugal precipitator is specifically designed to recover waste powder from in-house pharmaceutical processes such as compression and encapsulation, typically capturing 90 to 99.9% of waste powder. - Highly efficient design covering 90 - 99.9% - Prevents clogging and replacement of expensive filters in a central vacuum system or vacuum cleaner - Improved lot alignment and product recovery - Virtually zero maintenance costs with no moving parts or filters - Reconstituted powder can be re-introduced - minimizing material wastage and saving money
| Прибл. вес | 22 кг |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр корпуса циклона | 152.4 мм |
| Диаметр впускной/выпускной трубы | 63.5 мм |
| Диаметр выхода продукта | 101.6 мм |
Characteristics
Быстрый просмотр
Manual, up to 3.5 bar Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/greases, silicone (RTV)/gels, solder masks/pastes/PVA, thinner
| Вес | 40 г |
| Длина | 104 мм |
| Работа | ручная |
| Привод | ручная |
| Технические подробности | 0,14 кг |
| Вход материала | люэровский наконечник (мама) |
| Материал смачиваемых частей | только штуцер |
| Микродозирование | - |
| Диапазон вязкости жидкости (макс.) | 50,000 мПа · с. |
| Объем дозирования (мин.) | 0,0075 мл |
| Спрей | - |
| Заполненные материалы | + |
| Материал на выходе | люэровский наконечник (папа) |
| Скорость потока | 1680 мл / мин (вода, 3,5 бар) |
| Давление жидкости (макс.) | 3,5 бар |
| Материал | ПЭ |
Characteristics
Быстрый просмотр
The digital dispenser series is available in three models (pressure 2, 4 or 6 bar) with display, I/O port, vacuum control, incl. accessories and a large set of nozzles.
