Быстрый просмотр
The digital dispenser series is available in three models (pressure 2, 4 or 6 bar) with display, vacuum control, incl. Accessories
Быстрый просмотр
The heat exchanger is an option for the PTK Fluid Bed Dryer. The air is heated through this device and fed into the system. Directly before the blower, pre- and middle filters are installed, which filter the outside air supplied to the heat exchanger.
Быстрый просмотр
Our self-contained, ready-to-use design provides a functional clean space anywhere, anytime. Whether you want to expand production, R&D or manufacturing capacity at an existing facility, in a remote location or around the world, MCR (mobile clean rooms) can be transported and fully commissioned faster than other clean room options. Our pre-engineered MCRs provide a fast and flexible cleanroom manufacturing space without the significant time and cost associated with more traditional cleanroom options.
Быстрый просмотр
MACFUGE disc centrifuges with automatic unloading are designed and manufactured to separate a mixture of liquids with different specific gravity and solids.
| Бак | Скорость вращения 7.600 об / мин |
| Двигатель | мощность 15 кВт |
| Размеры | 760 X 1250 X в. Мм. 1600 |
Characteristics
Быстрый просмотр
As an option for the PTK tablet press, the powder feeder automatically feeds the powder into the main powder hopper of the machine using vacuum. If the level of powder in the hopper is low, a signal activated by the sensor starts the vacuum pump, which starts the powder supply.
Быстрый просмотр
The lightweight rotary valve is suitable for the pharmaceutical, chemical and food industries. - Delivers large volumes of powder at a controlled rate. - cGMP design - Easy to install - top and bottom halves connections can be supplied to match customer's existing ones. The valve is powered by a pneumatic actuator requiring a connection to compressed air, which means no wiring and simplifies valve testing in ATEX areas. - All parts are easily disassembled for easy cleaning and replacement of wear parts. - All contact parts are made of 316L steel, and non-metal parts are FDA compliant. Full documentation is provided with each valve. - Can be supplied with a small gap between rotor and gasket to prevent gasket friction with each revolution.
| Размеры | DN80, DN100, DN150, DN200, DN250, DN300, DN350, DN400 |
| Материалы | корпус и ротор нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
The vacuum conveyor uses negative pressure to gently capture materials for transfer. This process works by creating a pressure differential, pressure equalization creates suction. This principle is used when air is evacuated from a pipeline, creating a negative pressure that has the power to draw solid particles through the pipeline into a vacuum conveyor.
Быстрый просмотр
MACFUGE disc centrifuges with automatic unloading are designed and manufactured to separate a mixture of liquids with different specific gravity and solids.
| Бак | Скорость вращения 5,800 об / мин |
| Двигатель | Мощность 22 кВт |
| Размеры | 1000 X 1500 X в. Мм. 2000 г. |
Characteristics
Быстрый просмотр
The device for removing foreign substances generated by drying the coating solution in the coating drum removes them with a vacuum and collects them in a dust collector.
Быстрый просмотр
The pump rack supplies fluid from the fluid reservoir to the fluidized bed sprayer. By using a special hose for the peristaltic pump head, it can be used in a hygienic environment without harmful emissions. Equipped with a servomotor, it delivers liquid with sufficient force even at low rotation speed, and intuitive visibility is provided by our own program.
Быстрый просмотр
The capsule loader is an option for the PTK capsule filling machine. Designed to lift the capsules to prevent them from separating and crushing during loading. Automatic operation is controlled by a sensor.
Быстрый просмотр
Dust collector is an option for the PTK capsule filling machine. Dust is sucked out of the machine and dust collector through this device, which helps the machine to be neat and clean.
Быстрый просмотр
Pneumatic, especially suitable for abrasive and two-component media Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/lubricants, silicone (RTV)/gels, solder masks/pastes/PVA , solvent
| Вес | 90 г |
| Длина | 75 мм |
| Расход | 1980 мл / мин (вода, 4 бара) |
| Работа | пневматическая (давление и время) |
| Привод | пневматический |
| Технические подробности | 0,31 кг |
| Вход материала | люэровский наконечник (мама) |
| Диапазон вязкости жидкости (макс.) | 50,000 мПа · с. |
| Объем дозирования (мин.) | 0,0075 мл |
| Заполненные материалы | + |
| Материал на выходе | люэровский наконечник (папа) |
| Давление жидкости (макс.) | 4,0 бар |
| Материал смачиваемой части | ПЭ |
| Материал | ПЭ |
Characteristics
Быстрый просмотр
The powder loader is an option for the PTK capsule filling machine. The vacuum effect automatically feeds the powder into the main hopper. If there is not enough powder in the hopper, a signal activated by the sensor starts the vacuum pump, which starts the powder supply. The control panel and powder loader are combined and consist of a hopper and a suction pipe, as well as an antistatic connecting hose and an air hose.
Быстрый просмотр
The device for rejecting incorrectly installed capsules is located behind the feeder. If split or damaged capsules are blocking the channel, the device will purge air to remove the bad capsules from the supply port.
Быстрый просмотр
The MC DecJet® 200-500 series models are ideal for micronization of large batches of powders (500g - 800kg/h). The powder is fed at high speed into a cylindrical chamber where the particles are further accelerated by a stream of nitrogen or compressed air.
When particles moving in a spiral at different speeds collide, they are crushed. During the micronization process, smaller particles leave the chamber with the gas.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
Filter Drier Isolator Depending on the process, these isolators are typically designed as dual chamber glove box isolators specifically designed for use with an in-situ filter drier for toxic or sterile applications. The upper chamber is used for powder discharge, heel extraction and sampling from the filter drier, while the lower chamber is used for isolated collection of powder into bags or drums. Other equipment such as conical mills, etc. can be easily integrated. CIP cleaning guns and rotating spray heads usually provide easy cleaning. The system allows the powder to be hermetically discharged from small filter driers into large dryers with an area of several square meters. As an alternative,
Быстрый просмотр
To complement our range of downflow booths, we also have considerable experience in a wide range of airflow applications including powder handling units, drum/solvent chambers and laminar flow booths.
Быстрый просмотр
DCS® Docking The DCS® Docking System is specifically designed to connect and unload single or double lined Big Bags when fully sealed (<1µg/m3). For higher tightness requirements (0.1µg/m3), big bags can be equipped with a Rapid Transfer Port (RTP). DCS® guarantees both primary and secondary insulation with a glovebox allowing the operator to connect drum sleeves in a sealed environment.
Быстрый просмотр
MACFUGE manual discharge disc centrifuges are designed and built to separate mixtures of liquids of varying specific gravity and solids. These machines are simple and offer a variety of configurations to suit process requirements.
| Бак | Скорость вращения 9.600 об / мин |
| Двигатель | Мощность 1,5 кВт |
| Размеры | 420 X 730 X h. 574 |
Characteristics
