Быстрый просмотр
The PM Series PTK High Performance Mixers are designed for fast and efficient mixing of dry mixes and formulations as well as wet granulation using the combined action of paddle, chopper and liquid binders.
The mixing process can be fully automated and adjusted to optimal environmental conditions, guaranteeing exceptional product stability time after time.| Производительность | Производительность [кг]: 273-448; |
| Другие настройки | 2 |
| Объем | Объем емкости [л]: 1,270;Рабочий объем [л]: 390-640; |
| Параметры источника питания | 220/380 В перем. тока, 3 фазы, 50/60 Гц |
| Параметры управления | 24 В постоянного тока |
| Приводной двигатель мешалки [кВт] | 45 |
| Макс. скорость мешалки [об/мин] | 75 |
| Двигатель привода лопастей [кВт] | 15 |
| Макс. скорость лопастей [об/мин] | 3,400 |
| Размеры [мм] | 3,430 x 2,100 x 2,550 |
| Вес [кг] | 3,500 |
Characteristics
Быстрый просмотр
The metal detector is an option for the PTK tablet press. Most pharmaceutical tablets and capsules can be tested in the MET 30+ with an aperture size of 95mm W x 38mm H, providing calibrated sensitivity of 0.3mm Fe, 0.35mm Nfe and 0.5mm SST. 316 steel. For smaller products (typically no larger than 8 mm diameter), the MET 30+ can also be used with dimensions of 95 mm W x 22 mm H, providing an efficiency of 0.25 mm Fe, 0.3 mm Nfe and 0.39 mm StSt 316
Быстрый просмотр
The capsule loader is an option for the PTK capsule filling machine. Designed to lift the capsules to prevent them from separating and crushing during loading. Automatic operation is controlled by a sensor.
Быстрый просмотр
Hanningfield Uni-Hoist lifting systems are designed to handle containers such as Intermediate Bulk Containers (IBCs), drums, containers and bins. - Designed for safe and repeatable work in hygienic conditions - Reduced operator stress - "Raise, lower, turn, flip, secure" at the touch of a button - Versatile designs to handle drums, IBCs, machines - just about anything can be lifted
| Вращение (основания) | Да |
| Подача энергии | электропитание (3-х фазное) |
| Подъем и опускание (нагрузки) | Да |
| Инверсия (нагрузки) | Да |
Characteristics
Быстрый просмотр
Magnesium is supplied from a separate rack. The rack consists of a magnesium hopper and a control cabinet. Rollers are used to facilitate movement. Magnesium is supplied to the spray block, which is installed at the base of the feeder.
Быстрый просмотр
The PTS Powder Transfer System® is a vacuum and pressure based powder transfer system that eliminates the need for gravity unloading. The unique technology allows the transport of powders with different characteristics.
PTS not only provides complete process isolation, but also saves time. The principle of operation ensures that there is no product segregation and particle damage during transfer, and eliminates the risk of electrostatic charge buildup.
The design of the PTS allows CIP/SIP cleaning and sterilization.
More than 5,000 PTS systems are in use worldwide for applications ranging from loading reactors to unloading centrifuges or packing powders in highly isolated environments.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
The PF-1000H is an automatic capsule filling machine for powders, pellets or tablets, equipped with a WIP washing system, glove ports and inflatable seals for enhanced isolation.
| Производительность | Макс. производительность, порошок [капсул/ч]: 56,700; |
| Другие настройки | 2 |
| Параметры источника питания | 220/380/400/415/440/460 В перем. тока, 3 фазы, 50/60 Гц |
| Параметры управления | 24 В постоянного тока |
| Вес машины [кг] | 2,300 |
| Размер машины [мм] | 1,190 х 1,240 х 2,034 |
| Размеры капсул | Размер капсулы: #00, #0, #1, #2, #3, #4 |
| Макс. Скорость, порошок [об/мин] | 135 |
| Мощность главного двигателя [кВт] | 1.5 |
| Расход воздуха [л/мин] | 600 |
| Сжатый воздух [бар] | 6 |
| Размер шкафа управления [мм] | 650 х 600 х 1,500 |
| Количество сегментных отверстий | 7 |
Characteristics
Быстрый просмотр
Cone Mill (Independent Type) The cone mill is installed directly below the product discharge point, which allows the product to be ground to a specified size when discharging by selecting the correct sieve type. -Servo motor control for driving part -Compact structure with built-in servo motor -Easy and fast touch screen operation -Monitoring of current position and torque values on screen with graphical display -Providing screens of various types and sizes, including screens for wet and dry granulation. -Easy connection for wet or dry grinding mill together with vacuum conveyor and hopper
Быстрый просмотр
Chromatographic systems are used to separate the desired product from the possible impurities it may contain. This can be molecular size exclusion chromatography, affinity chromatography, ion exchange chromatography or hydrophobic chromatography. Pharmabios manufactures fully automated stations for purification and membrane separation processes. Stations can perform various sub-steps of each cleaning process (using chromatography or membrane filtration methods), as well as cleaning and disinfection steps.
| Размеры (мм. ДхШхВ) | 2700 x 1700 x 2200 |
| Диаметр трубки | 1.5 дюйма |
Characteristics
Быстрый просмотр
As an option for the PTK High Speed Mixer, the liquid binder is contained separately in its own tank and fed into the spray nozzle. The speed of the pump is controlled by an inverter or compressed air, which regulates the fluid flow.
Быстрый просмотр
The pump rack supplies fluid from the fluid reservoir to the fluidized bed sprayer. By using a special hose for the peristaltic pump head, it can be used in a hygienic environment without harmful emissions. Equipped with a servomotor, it delivers liquid with sufficient force even at low rotation speed, and intuitive visibility is provided by our own program.
Быстрый просмотр
Chromatographic systems are used to separate the desired product from the possible impurities it may contain. This can be molecular size exclusion chromatography, affinity chromatography, ion exchange chromatography or hydrophobic chromatography. Pharmabios manufactures fully automated stations for purification and membrane separation processes. Stations can perform various sub-steps of each cleaning process (using chromatography or membrane filtration methods), as well as cleaning and disinfection steps.
| Размеры (мм. ДхШхВ) | 2500 x 1500 x 2200 |
| Диаметр трубки | 1 дюйм |
Characteristics
Быстрый просмотр
As an option for the PTK tablet coater, the Hepa filter is equipped with a heat exchanger or dust collector and the air is filtered up to 99.9% (EN 1882 H13). There is also a pressure gauge to indicate when the filter needs to be cleaned/replaced.
Быстрый просмотр
The powder is loaded by a dust collector and discharged by an insulated vacuum conveyor. The finished material is fed through an antistatic hose to a vacuum conveyor (option). The anti-static hose minimizes getting stuck inside the hose, which reduces power transfer time and safely eliminates the risk of static electricity.
Быстрый просмотр
The heat exchanger is an option for the PTK Fluid Bed Dryer. The air is heated through this device and fed into the system. Directly before the blower, pre- and middle filters are installed, which filter the outside air supplied to the heat exchanger.
Быстрый просмотр
The vacuum conveyor uses negative pressure to gently capture materials for transfer. This process works by creating a pressure differential, pressure equalization creates suction. This principle is used when air is evacuated from a pipeline, creating a negative pressure that has the power to draw solid particles through the pipeline into a vacuum conveyor.
Быстрый просмотр
We understand that standard valves are not always suitable for your application and therefore we offer customized solutions for our customers. Most often, modified top and bottom halves connections are required if the standard connection types do not match the connection types on existing equipment.
Быстрый просмотр
The PTK tablet press option with an open feeder is designed for pellets with good fluidity or for those materials that are not fed efficiently through a mechanical feeder (force feed). Switching between mechanical feeder and open feeder is easy. Both types of feeders use the same hopper.
Быстрый просмотр
Automatic labeling machine type RE200 Automatic rotary machine for labeling cylindrical objects with self-adhesive labels. The range of diameters of labeled objects is 9 - 36 mm. Standard equipment: - softPLC on embedded PC with Windows 10 (Beckhoff CX 20x0) - 12" HMI color touch screen with 4-level password management and recipe management - Machine speed stepless, speed displayed on the HMI screen in objects per minute . - infeed magazine equipped with object counter with indication on HMI - Herma 500 label dispenser for self-adhesive labels: label height: max. 78 mm, label length: max. 100 mm, Maximum label roll diameter: 400 mm, core diameter: 76.2 mm standard, (specify required diameter when ordering, if not standard), - with label roll drive, - with loop pre-winding system, - with motorized waste labeling tape collection unit. - One set of interchangeable parts for one type of object size. Safety cabinet with locking safety mechanism. When only one door is open, the machine stops automatically with an error message on the HMI. Processing stations: supply magazine, labeling station automatic label applicator, with sensor control "no object - no label". Output magazine The capacity of the machine depends on the size of the object and the length of the label, as well as the required number of application of variable characters, and for cylindrical objects with a diameter of up to 15 mm, the productivity is up to 12000 / h. The machine is equipped with a label printer for applying variable information to labels
| Производительность | До 12000 объектов в час |
| Размеры объектов | Диаметр 9-36 мм |
| Скорость машины | бесступенчатая, скорость отображается в объектах в минуту |
| Высота этикеток | макс. 78 мм |
| Длина этикеток | макс. 100 мм |
| Максимальный диаметр рулона этикеток | 400 мм |
| Диаметр сердечника | стандартный 76,2 мм (при заказе указать требуемый диаметр, если не стандартный) |
Characteristics
Быстрый просмотр
Dec Group experts offer full support for integrating the serialization process into the pharmaceutical supply chain. Our experience and advice will help you integrate this process into your operating system in accordance with the standards you specify, as well as international and local regulations. Dec offers an end-to-end solution that combines specialized software, related robotics, and vision and printing components. Our serialization equipment is designed to simplify the pharmaceutical packaging process while meeting all of your specific requirements with a focus on overall equipment compatibility.
