Быстрый просмотр
Manual, up to 3.5 bar Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/greases, silicone (RTV)/gels, solder masks/pastes/PVA, thinner
Быстрый просмотр
Provides safe handling and easy transport of detachable turrets for installation, removal or maintenance.
Быстрый просмотр
The device for removing foreign substances generated by drying the coating solution in the coating drum removes them with a vacuum and collects them in a dust collector.
Быстрый просмотр
Stainless steel body, for low to medium viscosity materials Typical dispense liquids: Adhesives, UV adhesives, alcohols/methanol, oils/greases/lubricants, solvents
Быстрый просмотр
Быстрый просмотр
The PTK torque motor replaces the traditional belt driven motor and gearbox. This reduces heat generation and noise. Additional heat reduction is possible by selecting a water-cooled motor with intermittent water supply. The volume of water supply must be prepared at the customer's site.
Быстрый просмотр
The C35 BS corrugator with palletizer is the latest development designed to pack cans, tubes, bottles and cartons into large corrugated boxes and achieve the productivity required by high speed production lines.
| Производительность | До 8 объектов/мин |
| Другие настройки | 2 |
| Размеры | 6370 х 4335 x 3000(В) мм |
| Габариты короба | максимальные - 600 x 400 x 400 |
Characteristics
Быстрый просмотр
The Hanningfield Uni-Dust centrifugal precipitator is specifically designed to recover waste powder from in-house pharmaceutical processes such as compression and encapsulation, typically capturing 90 to 99.9% of waste powder. - Highly efficient design covering 90 - 99.9% - Prevents clogging and replacement of expensive filters in a central vacuum system or vacuum cleaner - Improved lot alignment and product recovery - Virtually zero maintenance costs with no moving parts or filters - Reconstituted powder can be re-introduced - minimizing material wastage and saving money
| Прибл. вес | 12 кг |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр корпуса циклона | 101.6 мм |
| Диаметр впускной/выпускной трубы | 50.8 мм |
| Диаметр выхода продукта | 63.5 мм |
Characteristics
Быстрый просмотр
Replacement parts are an option for the PTK capsule filling machine. The machine can be configured for any size capsule with a range of replacement parts available. The capsule filling device is designed to be easily replaced by qualified operators.
Быстрый просмотр
The powder is loaded by a dust collector and discharged by an insulated vacuum conveyor. The finished material is fed through an antistatic hose to a vacuum conveyor (option). The anti-static hose minimizes getting stuck inside the hose, which reduces power transfer time and safely eliminates the risk of static electricity.
Быстрый просмотр
The capsule polisher is an option for the PTK capsule filling machine. Dust on manufactured capsules can be removed with this capsule polishing machine.
Быстрый просмотр
Hanningfield Uni-Hoist lifting systems are designed to handle containers such as Intermediate Bulk Containers (IBCs), drums, containers and bins. - Designed for safe and repeatable work in hygienic conditions - Reduced operator stress - "Raise, lower, turn, flip, secure" at the touch of a button - Versatile designs to handle drums, IBCs, machines - just about anything can be lifted
| Вращение (основания) | Нет |
| Подача энергии | электропитание (3-х фазное) |
| Подъем и опускание (нагрузки) | Да |
| Инверсия (нагрузки) | Да |
Characteristics
Быстрый просмотр
Tank lamp is an option for the PTK High Speed Mixer. There is an LED light on the lid of the jar to check the powder while mixing. This lamp is also useful when the operator is checking the powder through the window on the machine. It is semi-permanent and the lamp cover can be removed separately. Thus, cleaning and maintenance are simplified.
Быстрый просмотр
The Hanningfield Uni-Dust centrifugal precipitator is specifically designed to recover waste powder from in-house pharmaceutical processes such as compression and encapsulation, typically capturing 90 to 99.9% of waste powder. - Highly efficient design covering 90 - 99.9% - Prevents clogging and replacement of expensive filters in a central vacuum system or vacuum cleaner - Improved lot alignment and product recovery - Virtually zero maintenance costs with no moving parts or filters - Reconstituted powder can be re-introduced - minimizing material wastage and saving money
| Прибл. вес | 34 кг |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр корпуса циклона | 168.2 мм |
| Диаметр впускной/выпускной трубы | 76.2 мм |
| Диаметр выхода продукта | 101.6 мм |
Characteristics
Быстрый просмотр
The device generates heated air to feed the fluidized bed dryer. This air handling unit contains a coil steam heating system, the machine will control the air temperature and adjust the steam to maintain the desired temperature. Contains pre-filter, middle filter and HEPA filter.
Быстрый просмотр
DMC Series automatic machines are designed for tablet/capsule counting and filling. Tablets/capsules fed from the hopper are aligned on continuously vibrating three-stage trays and pass through infrared counting sensors, allowing 100% accurate can filling.
| Другие настройки | 2 |
| Размеры | 5800 (Д) x 2120 (Ш) x 2000 (В) мм с конвейером |
| Вес нетто | 2300 кг |
| - Производительность | Макс. 25000 таблеток в минуту для круглых таблеток диаметром 8 мм. Фактическая скорость будет зависеть от диаметра горлышка банки, а также формы и размера продукта. |
| Размеры банок | диаметр 30-100 мм, высота 40-200 мм |
Characteristics
Быстрый просмотр
Magnesium is supplied from a separate rack. The rack consists of a magnesium hopper and a control cabinet. Rollers are used to facilitate movement. Magnesium is supplied to the spray block, which is installed at the base of the feeder.
Быстрый просмотр
- Stops powder flow allowing unloading when needed. Ideal for use on IBCs and containers. - cGMP design - Easy to install - top and bottom halves connections can be supplied to match customer's existing ones. - All parts can be easily disassembled for easy cleaning and replacement of wear parts. - All contact parts are made of 316L steel, and non-metal parts are FDA compliant. Full documentation is provided with each valve. - Can be supplied with a drive to automate the unloading if the manual lever is not suitable. - The valve can be equipped with various accessories to improve its performance, such as a positioner, when the customer wants to control the angle of the damper,
| Размеры | DN80, DN100, DN150, DN200, DN250, DN300, DN350, DN400 |
| Материалы | корпус и бабочка – нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
The Hanningfield Uni-Dust centrifugal precipitator is specifically designed to recover waste powder from in-house pharmaceutical processes such as compression and encapsulation, typically capturing 90 to 99.9% of waste powder. - Highly efficient design covering 90 - 99.9% - Prevents clogging and replacement of expensive filters in a central vacuum system or vacuum cleaner - Improved lot alignment and product recovery - Virtually zero maintenance costs with no moving parts or filters - Reconstituted powder can be re-introduced - minimizing material wastage and saving money
| Прибл. вес | 18 кг |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр корпуса циклона | 139.7 мм |
| Диаметр впускной/выпускной трубы | 63.5 мм |
| Диаметр выхода продукта | 101.6 мм |
Characteristics
Быстрый просмотр
The metal detector is an option for the PTK tablet press. Most pharmaceutical tablets and capsules can be tested in the MET 30+ with an aperture size of 95mm W x 38mm H, providing calibrated sensitivity of 0.3mm Fe, 0.35mm Nfe and 0.5mm SST. 316 steel. For smaller products (typically no larger than 8 mm diameter), the MET 30+ can also be used with dimensions of 95 mm W x 22 mm H, providing an efficiency of 0.25 mm Fe, 0.3 mm Nfe and 0.39 mm StSt 316
