Быстрый просмотр
The RINA spray dryer models operate continuously by spraying suspensions in a vertical drying tower. This solution is particularly recommended for heat sensitive pumpable products that require gentle and prolonged drying to obtain a dry powder of fine particles that can be further encapsulated.
| Испарение воды мин. кг / ч | 55 |
| Испарение воды макс. кг / ч | 90 |
Characteristics
Быстрый просмотр
The C2D Automatic Inspection Machine is a reliable and efficient system for visual inspection of a wide range of ampoules and vials for impurities and external defects, with increased productivity.
Image processing is performed using a special algorithm based on the Convel "Fast Vision" machine vision system.| Шум | <75 дБ |
| Вес | прибл. 1500 кг |
| Рабочая высота на входе и выходе | 950 мм ± 25 мм |
| Электропитание | 400 В ± 10% - 50/60 Гц |
| Потребляемая мощность | прибл. 5 кВтч |
| Инженерные системы | сжатый воздух (6 бар для 4,5 м3 / час) |
| Подача | лотками клиента |
| Скорость отжима | прибл. в диапазоне [300 - 3000] об / мин |
| Выдача | в лотки клиентов с точным подсчетом |
| Соответствие | Директива по машинному оборудованию 2006/42 / EC. Программное обеспечение оборудования соответствует требованиям 21 CFR, часть 11. |
Characteristics
Быстрый просмотр
When working with sticky powders, the installation of a hopper with a fluidization system and a crusher allows efficient transfer of powders to further stages of the process without the risk of product retention.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
MECAS is a fully automatic assembly and capping system that complements the SYFPAC® LVP range where EURO type caps are required. MECAS consists of two units connected to each other by a conveyor belt: 1. The first unit, named T2, assembles the Euro caps onto the container head immediately after placing a drop of water for injection between the cap and the bottle head. This operation contributes to the effective sterilization of the space between the cap and the head of the bottle during the final sterilization. 2. The second and last production station is called 9Z and is designed to seal the vial cap by injection molding. This unit is equipped with separate hot runner injection units to have complete control over each station. The MECAS system is gateless, so there is no plastic waste during production.
| Производительность | до 2.500 единиц в час |
| Тип упаковки | EURO-колпачки |
| Требуемое пространство T2 | 3.8 x 3.4 x 2.7 м |
| Требуемое пространство 9Z | 5.4 x 3.4 x 2.7 м |
Characteristics
Быстрый просмотр
Hanningfield Uni-Hoist lifting systems are designed to handle containers such as Intermediate Bulk Containers (IBCs), drums, containers and bins. - Designed for safe and repeatable work in hygienic conditions - Reduced operator stress - "Raise, lower, turn, flip, secure" at the touch of a button - Versatile designs to handle drums, IBCs, machines - just about anything can be lifted
| Вращение (основания) | Да |
| Подача энергии | Сжатый воздух |
| Подъем и опускание (нагрузки) | Да |
| Инверсия (нагрузки) | Да |
Characteristics
Быстрый просмотр
Split butterfly valves consist of two parts: an active half and a passive half. Typically, the active half is connected to a receiving vessel or processing machine, while the passive half is usually mounted on a discharge drum or similar device.
| Размеры | DN50, DN100, DN150, DN200, DN250 |
| Материалы | корпус и бабочка – нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
Manual, up to 3.5 bar Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/greases, silicone (RTV)/gels, solder masks/pastes/PVA, thinner
| Вес | 40 г |
| Длина | 104 мм |
| Работа | ручная |
| Привод | ручная |
| Технические подробности | 0,14 кг |
| Вход материала | люэровский наконечник (мама) |
| Материал смачиваемых частей | только штуцер |
| Микродозирование | - |
| Диапазон вязкости жидкости (макс.) | 50,000 мПа · с. |
| Объем дозирования (мин.) | 0,0075 мл |
| Спрей | - |
| Заполненные материалы | + |
| Материал на выходе | люэровский наконечник (папа) |
| Скорость потока | 1680 мл / мин (вода, 3,5 бар) |
| Давление жидкости (макс.) | 3,5 бар |
| Материал | ПЭ |
Characteristics
Быстрый просмотр
The Rotovalve Plus is designed to assist in the loading and volumetric dosing of bulk solids. - Delivers large volumes of powder at a controlled rate. - Ideal for applications where a higher degree of accuracy is required (compared to Rotovalve Light). - CIP and SIP cleaning - All parts are easily disassembled for easy cleaning and replacement of wear parts. - All contact parts are made of 316L steel, and non-metal parts are FDA compliant. Full documentation is provided with each valve. - cGMP design - Easy to install - top and bottom halves connections can be supplied to match customer's existing ones.
| Размеры | DN100, DN150, DN200 |
| Материалы | корпус и ротор – нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
This station is designed for unloading powder from flexible containers (big bags).
Dec's big bag unpacking stations are modular in design to adapt to product characteristics. The construction frame is mounted on load cells, which guarantees accurate dosing.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
The Rotodoser is designed for applications where high precision and accurate dosing are required. - Provides the user with high-precision dosing and full control over the supply of material. - cGMP design - Easy to install - top and bottom halves connections can be supplied to match customer's existing ones. - All parts are easily disassembled for easy cleaning and replacement of wear parts. - All contact parts are made of 316L steel, and non-metal parts are FDA compliant. Full documentation is provided with each valve.
| Размеры | DN100, DN150, DN200, DN250 |
| Материалы | корпус – нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
Быстрый просмотр
Hanningfield Uni-Hoist lifting systems are designed to handle containers such as Intermediate Bulk Containers (IBCs), drums, containers and bins. - Designed for safe and repeatable work in hygienic conditions - Reduced operator stress - "Raise, lower, turn, flip, secure" at the touch of a button - Versatile designs to handle drums, IBCs, machines - just about anything can be lifted
| Вращение (основания) | Нет |
| Подача энергии | Нет / Ручное |
| Подъем и опускание (нагрузки) | Да |
| Инверсия (нагрузки) | Да |
Characteristics
Быстрый просмотр
The TF320 automatic blister machine is suitable for medium to large volume production. The main components (forming, sealing, tape pulling units, coding and cutting) are controlled by servo motors.
Coding and cutting units can work with 1, 2 or 3 rows of blister packs, ensuring high production efficiency with minimal material waste.| Производительность | до 600 блистеров / мин |
| Другие настройки | 2 |
| Максимальная глубина формовки | 12 мм |
Characteristics
Быстрый просмотр
The RM series of automatic reciprocating blister machines is suitable for medium to large production volumes and is available in a range of models and designs to suit customer requirements.
The features of the machine are the high flexibility in choosing the layout of the cells of the blister pack and the ability to install various types of feeding systems for the product to be packaged.| Производительность | до 500 блистеров / мин |
| Другие настройки | 2 |
| Максимальная глубина формовки | 12 мм |
Characteristics
Быстрый просмотр
Star Wheel type tare and gross weighing system Tare weighing process: Weighing the tare weight of a can Filling process: after checking the tare weight - filling with tablets or capsules Gross weight checking process: Weighing the total gross weight to check for overfilling, underfilling, tablet breakage or empty capsule. Rejection Process: In case of incorrect filling or weight difference caused by broken tablet or empty capsule, a rejection will be made
| Диапазон диаметров банки | 40-200 мм |
| ** банки любого размера, выходящие за пределы стандартного диапазона, должны быть проверены COUNTEC на образцы.Производительность | до 40 банок / мин (на основе банки Ø 50 мм) |
| Информация о тензодатчиках | Поставщик - SATORIUS / Германия (2 датчика веса) |
Characteristics
Быстрый просмотр
Hanningfield Uni-Hoist lifting systems are designed to handle containers such as Intermediate Bulk Containers (IBCs), drums, containers and bins. - Designed for safe and repeatable work in hygienic conditions - Reduced operator stress - "Raise, lower, turn, flip, secure" at the touch of a button - Versatile designs to handle drums, IBCs, machines - just about anything can be lifted
| Вращение (основания) | Нет |
| Подача энергии | Сжатый воздух |
| Подъем и опускание (нагрузки) | Да |
| Инверсия (нагрузки) | Да |
Characteristics
Быстрый просмотр
SYFPAC® LVP is a machine for aseptic primary packaging of parenteral solutions in plastic vials from 50 to 1000 ml (larger volumes up to 13 l available on request).
The shape of the bottles can be changed according to the requirements, and it is also possible to emboss information such as the company logo, expiration date, batch number, etc.| Производительность | до 27.000 / 2.700 единиц в час (зависит от вязкости раствора и формы флакона) |
| Тип упаковки | Емкости для сильнодействующих веществ малого и большого объема |
| Объем наполнения | от 0.20 мл до 50 мл / от 50 мл до 2500 мл |
| Температура жидкости | от 4 °C до 30 °C |
| Размеры чистого помещения | 5.4 x 6.4 x 3.2 м |
Characteristics
Быстрый просмотр
This station is designed for unloading powder from flexible containers (big bags).
Partial emptying of big bags is a problem because it is usually not possible to quickly close a big bag when the outlet is full of product.
The solution is an automated unpacking station where the big bags are unloaded from above with a suction lance connected to the PTS Powder Transfer System®. The spear is automated and without operator intervention allows you to extract the exact required amount of powder from the big bag thanks to weight control through load cells.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
The Hanningfield Uni-Dust centrifugal precipitator is specifically designed to recover waste powder from in-house pharmaceutical processes such as compression and encapsulation, typically capturing 90 to 99.9% of waste powder. - Highly efficient design covering 90 - 99.9% - Prevents clogging and replacement of expensive filters in a central vacuum system or vacuum cleaner - Improved lot alignment and product recovery - Virtually zero maintenance costs with no moving parts or filters - Reconstituted powder can be re-introduced - minimizing material wastage and saving money
| Прибл. вес | 22 кг |
| Контактирующие c продуктом детали | нержавеющая сталь 316L |
| Не контактирующие с продуктом детали | нержавеющая сталь 304 |
| Диаметр корпуса циклона | 152.4 мм |
| Диаметр впускной/выпускной трубы | 63.5 мм |
| Диаметр выхода продукта | 101.6 мм |
Characteristics
Быстрый просмотр
Pneumatic, especially suitable for abrasive and two-component media Dispensing materials: Adhesives, UV adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylate, oils/greases/lubricants, silicone (RTV)/gels, solder masks/pastes/PVA , solvent
| Вес | 90 г |
| Длина | 75 мм |
| Расход | 1980 мл / мин (вода, 4 бара) |
| Работа | пневматическая (давление и время) |
| Привод | пневматический |
| Технические подробности | 0,31 кг |
| Вход материала | люэровский наконечник (мама) |
| Диапазон вязкости жидкости (макс.) | 50,000 мПа · с. |
| Объем дозирования (мин.) | 0,0075 мл |
| Заполненные материалы | + |
| Материал на выходе | люэровский наконечник (папа) |
| Давление жидкости (макс.) | 4,0 бар |
| Материал смачиваемой части | ПЭ |
| Материал | ПЭ |
Characteristics
Быстрый просмотр
The lightweight rotary valve is suitable for the pharmaceutical, chemical and food industries. - Delivers large volumes of powder at a controlled rate. - cGMP design - Easy to install - top and bottom halves connections can be supplied to match customer's existing ones. The valve is powered by a pneumatic actuator requiring a connection to compressed air, which means no wiring and simplifies valve testing in ATEX areas. - All parts are easily disassembled for easy cleaning and replacement of wear parts. - All contact parts are made of 316L steel, and non-metal parts are FDA compliant. Full documentation is provided with each valve. - Can be supplied with a small gap between rotor and gasket to prevent gasket friction with each revolution.
| Размеры | DN80, DN100, DN150, DN200, DN250, DN300, DN350, DN400 |
| Материалы | корпус и ротор нержавеющая сталь EN 1.4404 (AISI 316L) |
| Финишная обработка | Ra 0.5 мкм внутри |
Characteristics
