Быстрый просмотр
Mixing powder is a complex process and the final results will strongly depend on the material properties and the selected type of mixer. It is therefore of upmost importance to validate the efficiency of the mixer and the proper process parameters for any new mixing operation. To meet this need for R&D and pilot purposes, the PTS Batchmixer® can be offered in a small format ranging from a few to 50 l.
| Ширина машины (мм) | 1 |
| Технические данные | 1 |
| Другие настройки | 2 |
Characteristics
77 777 777 руб./шт
Варианты цен
77 777 777 руб./шт
from 77 777 777 руб. /шт
Модель—R&D Решения
- R&D Решения
В зависимости от требуемого уровня автоматизации система может снабжаться с различными опциями—CIP
- CIP
Into a basket
Request in 1 click
Быстрый просмотр
The RINA SRP models are vertical decanter industrial centrifuges with a tubular drum, rotating at a very high speed (17.000G mini). They are used for solid-liquid separation (C version) or liquid-liquid separation (S version). The model is equipped with a CIP / SIP equipment cleaning and disinfection system (washing and sterilization in place)
| Объем лт . | 5 |
| Скорость об / мин | 17100 |
| Масса | 1500 кг |
| Размер | 2.000x800x1200 |
Characteristics
Быстрый просмотр
The RINA spray dryer models operate continuously by spraying suspensions in a vertical drying tower. This solution is particularly recommended for heat sensitive pumpable products that require gentle and prolonged drying to obtain a dry powder of fine particles that can be further encapsulated.
Быстрый просмотр
PTS Batchmixer® is usually integrated in a process line in a closed way by flexible lines and doesn't require any disconnection during the operation. The system will be cleaned and sterilized in line with the upstream and downstream equipment. PTS Batchmixer® is designed according to the latest cGMP requirements without internal parts or inaccessible areas allowing the system to be sanitized or sterilized with either 90°C hot water or steam. The system is equipped with various temperature probes for temperature mapping as well as a steam trap valve at the lowest part of the mixer. The vessel is insulated to prevent a direct contact with the vessel wall and keeping heat loss as low as possible.
| Другие настройки | 2 |
Characteristics
77 777 777 руб./шт
Варианты цен
77 777 777 руб./шт
from 77 777 777 руб. /шт
Модель—Стерильное смешивание
- Стерильное смешивание
Into a basket
Request in 1 click
Быстрый просмотр
Microdosing devices are based on PTS technology and allow very small amounts (<1mg) of powder to be accurately and quickly dispensed in less than a second. High accuracy, up to 1% RSD, is achieved even with changes in bulk density, since the powder in the chamber is pre-compacted under vacuum. Compared to typical mechanical dosing devices such as auger systems, devices based on PTS technology can achieve higher accuracy over a larger range of amounts from 1 mg to several grams because the system is less affected by changes in powder properties. Depending on the amount of powder dispensed, Dec has developed different dosing systems to achieve the best performance in terms of accuracy, speed and investment.
77 777 777 руб./шт
Варианты цен
77 777 777 руб./шт
from 77 777 777 руб. /шт
Модель—uPTS
- uPTS
- flexPTS
- sPTS
Скорость—1-4 с
- 1-4 с
Диапазон дозирования—<1 - 500 мг
- <1 - 500 мг
Точность—2% RSD
- 2% RSD
Регулировка дозы (на одном устройстве дозирования)—Коэффициент до 5
- Коэффициент до 5
Вращающиеся или движущиеся части—Динамически регулируемая
- Динамически регулируемая
Дизайн—Гигиеничный
- Гигиеничный
Процесс дозирования—Быстрый
- Быстрый
Дозирование—Объемное и объемно-гравиметрическое
- Объемное и объемно-гравиметрическое
Контроль каждого количества порошка—Гравиметрический или встроенный
- Гравиметрический или встроенный
Тип дозировки—Одновременная, многократная
- Одновременная, многократная
Металлические детали—Нержавеющая сталь ISO 1.4435 или эквивалент (AISI 316L), анодированный алюминий
- Нержавеющая сталь ISO 1.4435 или эквивалент (AISI 316L), анодированный алюминий
Полимерные компоненты—соответствуют требованиям 2002/72/EC и/или ADA
- соответствуют требованиям 2002/72/EC и/или ADA
Into a basket
Request in 1 click
Быстрый просмотр
The Ezi-Flow™ UV-C System is an alternative solution for aseptic transfer of substances. Aseptic product transfer using hydrogen peroxide vapor is a laborious and costly solution. A new approach to autonomous transmission of NSAs using UV radiation can reduce complexity and cost while increasing productivity.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
The versatile UMS DecMill® solution is designed for product grinding and offers maximum flexibility in a small footprint.
Key benefits:
- Real-time temperature monitoring- Best particle size distribution (PSD)
- CIP/SIP cleaning available
| Другие настройки | 2 |
| Экран | ⌀100 мм |
| Контактный диск | ⌀110 мм |
| Максимальная частота вращения ротора | 24`800 |
| Мощность двигателя | 2 кВт |
Characteristics
77 777 777 руб./шт
Варианты цен
77 777 777 руб./шт
from 77 777 777 руб. /шт
Модель—UMS DecMill 100
- UMS DecMill 100
- UMS DecMill 150
- UMS DecMill 200
- UMS DecMill 300
Into a basket
Request in 1 click
Быстрый просмотр
The RINA SRP models are vertical decanter industrial centrifuges with a tubular drum, rotating at a very high speed (15.000G mini). They are used for solid-liquid separation (C version) or liquid-liquid separation (S version).
| Ø барабана (мм) | 145 |
| Высота барабана, мм | 735 |
| Объем лт . | 10 |
| Скорость об / мин | 13700 |
| Мощность мотора, л.с. | 5,5 |
| Ø барабана, дюйм | 5,71 |
| Высота барабана в дюймах | 29 |
| Объем Cu. Фут . | 0,35 |
Characteristics
Быстрый просмотр
Filling needles made of 316L stainless steel, Hastelloy C-22, or plastic needles, including Ketron Peek® material, are custom made and meet all GMP requirements. Available tip options (flat, angled, multi-hole, anti-drip, etc.) allow you to work with all types of products - liquid, abrasive, foamy, viscous.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
Washing needles for ampoules, vials and syringes can be made from a variety of materials (plastic, stainless steel, ceramics), including acid-resistant or autoclavable materials.
The variety of shapes and the availability of individual designs according to customer requirements allow you to choose needles that provide the most effective cleaning of containers.| Другие настройки | 2 |
Characteristics
Быстрый просмотр
Dosing pumps made of stainless steel, titanium or Hastelloy C-22, manufactured according to customer requirements, are designed to fill the product into ampoules, vials, cartridges, jars, syringes and other containers. DLC PVD or CrN PVD coatings (certificates CE 1935/2004, ISO 10993-5:2009) provide smooth movement and high hardness of the surface layer, which significantly reduces wear on mechanical parts.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
AranBiotech offers a wide range of bulk disposable bags that allow you to work with sterile liquid products in large volumes, have a high level of mechanical strength and chemical resistance.
Designed to comply with regulatory requirements, flexible systems offer undeniable advantages over traditional rigid containers: they require no cleaning and maintenance, as well as significant time and space savings, thereby increasing the efficiency of production processes.| Другие настройки | 2 |
Characteristics
Быстрый просмотр
AranBiotech offers a wide range of gamma sterilized flat disposable bags for use in the pharmaceutical and food industries.
Designed to comply with regulatory requirements, flexible systems offer undeniable advantages over traditional rigid containers: they require no cleaning and maintenance, as well as significant time and space savings, thereby increasing the efficiency of production processes.| Другие настройки | 2 |
Characteristics
Быстрый просмотр
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
Dosing pumps made of stainless steel, titanium or Hastelloy C-22, manufactured according to customer requirements, are designed to fill the product into ampoules, vials, cartridges, jars, syringes and other containers. A key feature of this modification is the dedicated CIP/SIP ports allowing automatic validated CIP/SIP cleaning and sterilization.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
Ezi-Flow CSV is a flexible solution - a unique and highly efficient system for the isolated transport of highly active and toxic products, suitable for powders and solids, sterile products and tablets.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
316L stainless steel, Hastelloy C-22, or plastic needles, including Ketron Peek®, nitrogen injection needles designed to supply inert gas before/during/after filling containers on the filling machine, are custom made and fit all GMP requirements.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
Designed for the pharmaceutical and biopharmaceutical industries, Ezi-Dock™ Disposable Bags offer maximum convenience and cost-effectiveness, and their double-walled design reduces puncture risk and enhances durability.
| Другие настройки | 2 |
Characteristics
Быстрый просмотр
Fine FA tanks are used in the biochemical/biotech industry to store ready-to-use solutions under controlled conditions.
Tanks are made of high quality steel AISI 316L, 316Ti, 304 and electropolished. The volumes of containers are determined by the customer's requirements - from 5 to 50,000 liters.| Другие настройки | 2 |
Characteristics
Быстрый просмотр
Hanningfield supplies a wide range of stainless steel drums for convenient and reusable storage of valuable powders.
| Внутренний диаметр (мм) | 196 |
| Номинальная высота (мм) | 200 |
Characteristics
